TN-70F - TV wall mount DEXP - Free user manual and instructions

Product Type	Wall Mount for Flat Screen TV/Monitor
Brand	DEXP
Model	TN-70F
VESA Compatibility	200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 mm
Maximum Screen Size	Up to 70 inches
Weight Capacity	Up to 50 kg (110 lbs)
Material	Steel
Color	Black
Installation Type	Wall Mounted
Tilt	Fixed (no tilt)
Swivel	Fixed (no swivel)
Profile	Low profile
Mounting Hardware	Included (screws and bolts)
Assembly Required	Yes
Safety	Use safety gear and proper tools; professional installation recommended
Indoor Use Only	Yes
Maintenance	Check security every 3 months
Wall Type	Solid concrete or wood studs
Over-Tightening Warning	Do not overtighten mounting screws
Choking Hazard	Small parts; keep away from children

Frequently Asked Questions - TN-70F DEXP

What tools are needed for installation?

You will need a drill, screwdriver, level, and a stud finder (if mounting to wood studs). Safety gear like gloves and safety glasses is recommended.

How do I check if my TV is compatible with the TN-70F mount?

Ensure your TV's VESA pattern matches one of the supported sizes: 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, or 400x400 mm. Also ensure the TV weight does not exceed 50 kg and screen size is up to 70 inches.

Can I install this mount on a drywall?

No, this mount is designed for solid concrete or wood studs only. Installing on drywall alone may cause failure and injury. Always mount into structural supports.

What is the maximum weight this mount can hold?

The maximum weight capacity is 50 kg (110 lbs). Never exceed this limit to avoid product failure and personal injury.

Is this mount suitable for outdoor use?

No, this product is indoor use only. Using it outdoors can lead to product failure and personal injury due to weather exposure.

How often should I check the mount for safety?

Perform a safety check at least every three months. Ensure all screws are tight and the mount is securely attached to the wall.

Can I tilt or swivel the TV after mounting?

No, the TN-70F is a fixed mount with no tilt or swivel capabilities. For adjustable mounts, consider other models.

What should I do if I am missing parts?

Contact your place of purchase or DEXP support for a replacement. Refer to the component checklist in the manual to verify all parts before installation.

Are there any dangers during installation?

Yes, improper installation can cause damage or serious personal injury. Use safety gear, follow instructions closely, and consider professional installation. Also, small parts pose a choking hazard to children.

How do I clean the mount?

The mount can be wiped with a dry cloth. Avoid using liquids or abrasive cleaners to prevent damage to the finish.

USER MANUAL TN-70F DEXP

EN Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

• Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury

- Safety gear and proper tools must be used. This product should only be installed by professionals.

* This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.

• Make sure that the supporting surface will safely support the combined weight of the

• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.

* This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.

- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of

purchase for a replacement.

MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).

5.3.17: 154,250, all with the 5.3.17: 6,800, but of that "the

Technical line drawing of a mechanical support structure with a vertical slot and mounting holes (no text or symbols)

TN-70F

200x100/200x200 300x200/300x300 400x200/400x300 400x400