PXBPS-254 - Sander Ozito - Free user manual and instructions
Find the device manual for free PXBPS-254 Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Random Orbital Sander |
| Brand | Ozito |
| Model | PXBPS-254 |
| Power Source | 240V AC, 50Hz |
| Motor Power | 250 W |
| No-Load Speed | 6,000 - 12,000 rpm (variable) |
| Pad Size | 125 mm (5 in) |
| Orbit Diameter | 2.8 mm |
| Dust Collection | Built-in dust collection bag |
| Sandpaper Attachment | Hook and loop (Velcro) |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 260 x 120 x 150 mm |
| Noise Level | 82 dB(A) |
| Vibration Level | 6.8 m/s² |
| Safety Features | Lock-on button, dust-sealed switch |
| Included Accessories | Dust bag, 5 sanding discs |
| Maintenance | Clean dust bag regularly, check carbon brushes |
| Spare Parts Availability | Sandpaper, dust bags, carbon brushes |
Frequently Asked Questions - PXBPS-254 Ozito
What grit sandpaper should I use for initial sanding?
For rough sanding, use a coarse grit like 40-60. For finishing, use 120-240 grit. Always start with a lower grit and work up.
How do I change the sanding disc?
Peel off the old disc and align the new hook-and-loop disc, pressing firmly onto the pad. Ensure the holes align with the dust extraction holes.
Can I use this sander on painted surfaces?
Yes, but be careful not to generate excessive heat. Use a finer grit and move the sander steadily to avoid damaging the paint.
How should I clean the dust bag?
Empty the dust bag after each use. Wash it with mild soap and water if necessary, then let it dry completely before reattaching.
What is the variable speed control for?
Adjust the speed dial to match the material: lower speeds for plastic or delicate surfaces, higher speeds for wood or metal.
How do I replace the carbon brushes?
Unplug the sander. Remove the brush caps on the motor housing, take out old brushes, and insert new ones. Ensure they fit snugly. Reassemble caps.
Why is my sander vibrating excessively?
Check that the sanding disc is properly attached and not worn out. Also ensure the pad is not damaged. Excessive wear on bearings may cause vibration.
Can I use this sander for sanding metal?
Yes, but use appropriate sandpaper for metal (e.g., aluminum oxide). Note that metal sanding creates sparks; avoid flammable materials.
How do I attach the dust bag?
Slide the dust bag onto the exhaust port at the rear of the sander until it clicks into place. Ensure it is fully secured.
What should I do if the sander overheats?
Stop using immediately. Check for blocked ventilation and clean dust. Allow the sander to cool for at least 15 minutes before resuming.
User questions about PXBPS-254 Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual PXBPS-254 - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PXBPS-254 by Ozito.