ESL94585RO - Dishwasher ELECTROLUX - Free user manual and instructions
Find the device manual for free ESL94585RO ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Electrolux |
| Model | ESL94585RO |
| Capacity | 13 place settings |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 45 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 266 kWh |
| Water Consumption per Cycle | 9.9 L |
| Noise Level | 44 dB(A) |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Rinse, Pre-wash |
| Drying System | AirDry |
| Delay Start | Yes, up to 24 hours |
| Salt and Rinse Aid Indicator | Yes |
| Child Lock | Yes |
| Water Supply | Cold water only |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Spare Parts Availability | 7 years after production end |
| Repair Index | 8.0/10 |
| Recommended Detergent | Any standard dishwasher detergent |
Frequently Asked Questions - ESL94585RO ELECTROLUX
How do I install the dishwasher?
Ensure the water supply and drainage are correctly connected. Level the dishwasher using the adjustable feet. Connect to a 220-240V power outlet. Refer to the installation guide for detailed steps.
Why is the dishwasher not starting?
Check that the door is properly closed and latched. Ensure the power cord is plugged in and the circuit breaker is on. Also, verify that the child lock is not activated.
How do I add salt and rinse aid?
Open the salt container (usually on the bottom) and fill with dishwasher salt. For rinse aid, open the dispenser on the door and pour until the indicator shows full. Use only products designed for dishwashers.
What does the error code E5 mean?
Error code E5 indicates a water heating issue. Check the water supply temperature and ensure the heating element is working. If persistent, contact service.
Can I use this dishwasher with hot water?
No, this model is designed for cold water supply only. Connecting to hot water may damage internal components.
How do I clean the filters?
Remove the lower basket and unscrew the cylindrical filter. Rinse under running water. Clean the flat filter beneath. Reassemble and tighten. Do this weekly for best performance.
What is the energy consumption of the Eco program?
The Eco program uses 0.92 kWh per cycle and consumes about 9.9 L of water. It is the most efficient for normally soiled dishes.
How do I activate the child lock?
Press and hold the Start button for 3 seconds until the child lock indicator lights up. To deactivate, repeat the same step.
Can I delay the start of a cycle?
Yes, press the Delay Start button to set a delay from 1 to 24 hours. Close the door and the cycle will start after the set time.
Where can I get spare parts?
Spare parts are available from authorized Electrolux service centers or online. Use the model number ESL94585RO to find correct parts.
User questions about ESL94585RO ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual ESL94585RO - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESL94585RO by ELECTROLUX.