CFS-SP WB - Uncategorized HILTI - Free user manual and instructions
Find the device manual for free CFS-SP WB HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Name | Hilti CFS-SP WB |
| Brand | Hilti |
| Product Type | Firestop Wrap Strip |
| Application | Firestopping around plastic pipes |
| Material | Intumescent graphite compound |
| Color | Gray |
| Length | 600 mm |
| Width | 50 mm |
| Thickness | 2 mm |
| Weight per Strip | 0.15 kg |
| Fire Resistance Rating | Up to 120 minutes (EI 120) |
| Maximum Service Temperature | 1000 °C |
| Installation Method | Wrap around pipe, secure with tape |
| Compatible Pipe Diameter | Up to 160 mm |
| Certifications | ETAG 026, UL 1479 |
| Shelf Life | 5 years (unopened, dry storage) |
| Storage Conditions | 10 °C to 30 °C, <70% RH |
| Maintenance | Visual inspection annually |
Frequently Asked Questions - CFS-SP WB HILTI
What is the Hilti CFS-SP WB used for?
The Hilti CFS-SP WB is a firestop wrap strip designed to seal around plastic pipes passing through fire-rated walls and floors, maintaining the fire barrier integrity.
How do I install the CFS-SP WB?
Wrap the strip around the pipe with the intumescent side facing the pipe. Overlap the ends by at least 50 mm and secure with the provided adhesive tape or wire. Ensure the strip is centered on the penetration.
What pipe materials is it compatible with?
It is compatible with plastic pipes such as PVC, PE, PP, and ABS. Not suitable for metal pipes without additional measures.
What is the fire rating of the CFS-SP WB?
Depending on the specific assembly, it can achieve up to 120 minutes (EI 120) fire resistance according to EN 1366-3.
Can the CFS-SP WB be used outdoors?
No, it is intended for indoor use only. Exposure to moisture or UV can degrade the intumescent material.
What is the shelf life of the product?
The shelf life is 5 years when stored in original packaging in a cool, dry place at temperatures between 10 °C and 30 °C.
Do I need to use additional sealant?
For most applications, the wrap alone is sufficient. However, for irregular gaps or larger penetrations, a compatible firestop sealant may be required to achieve the specified rating.
How do I clean the CFS-SP WB if dirty?
Do not clean with water or solvents. Gently brush off dry dirt with a soft brush. Avoid damaging the intumescent layer.
Is the CFS-SP WB reusable?
No, it is a single-use product. Once exposed to fire or removed, it must be replaced with a new strip.
Where can I find the installation manual?
The full installation manual is available for download at notice-facile.com or from the Hilti website. Follow the specific assembly details for your wall or floor type.
User questions about CFS-SP WB HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CFS-SP WB - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CFS-SP WB by HILTI.