P842 - Router Perle - Free user manual and instructions
Find the device manual for free P842 Perle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Router |
| Model | P842 |
| Brand | Perle |
| Dimensions (W x D x H) | 200 x 150 x 44 mm |
| Weight | 0.8 kg |
| Power Supply | 12-24 V DC, 5W typical |
| Network Interfaces | 2x Gigabit Ethernet, 1x RS232/422/485 |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Max Data Rate | Up to 867 Mbps (5 GHz) |
| Security | WPA2, WPA3, firewall, VPN pass-through |
| Management | Web interface, CLI, SNMP |
| Operating Temperature | -40°C to 75°C |
| Humidity | 5% to 95% non-condensing |
| Mounting | DIN rail or wall mount |
| Regulatory Certifications | FCC, CE, UL |
| Warranty | 5 years |
Frequently Asked Questions - P842 Perle
How do I reset the Perle P842 router to factory defaults?
Locate the reset button on the device. Press and hold it for approximately 10 seconds while the device is powered on. Release the button when the LEDs indicate a reset (all LEDs flash). The router will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. Default username is admin and default password is admin or blank. Check the device label for specifics.
How can I update the firmware on my P842 router?
Download the latest firmware from the Perle support website. Log in to the web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Does the P842 support VPN connections?
Yes, the P842 supports VPN pass-through and can be configured for IPsec, PPTP, and L2TP VPNs. Detailed setup is in the manual.
What are the recommended cleaning and maintenance procedures?
Use a dry, soft cloth to clean the exterior. Do not use solvents or abrasive cleaners. Ensure vents are free from dust. For internal cleaning, consult a professional.
How do I configure the wireless settings?
Access the web interface, go to Wireless > Basic Settings. Set SSID, security mode (e.g., WPA2-PSK), and passphrase. Save and reboot.
What should I do if the router overheats?
Ensure adequate ventilation. Do not block air vents. If overheating persists, reduce ambient temperature or relocate the router. The device can operate from -40°C to 75°C.
Can I mount the P842 on a DIN rail?
Yes, the P842 is designed for DIN rail or wall mount mounting. A DIN rail mounting kit may be required; refer to the installation guide.
What is the power consumption of the P842?
Typical power consumption is 5 watts at 12-24 V DC. Use a regulated power supply within the specified range.
Where can I find spare parts or accessories?
Contact Perle support or visit the official website. Common accessories include power adapters, antenna kits, and mounting brackets.
User questions about P842 Perle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual P842 - Perle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P842 by Perle.