SuperServer 5018R-M - Barbecue Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 5018R-M Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 1U Rackmount Server |
| Brand | Supermicro |
| Model | SuperServer 5018R-M |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 17.2 in x 19.6 in x 1.7 in (437 mm x 498 mm x 43 mm) |
| Weight | Approximately 28 lbs (12.7 kg) |
| Processor Support | Intel Xeon E3-1200 v3 series, 4th Gen Core i3, Pentium, Celeron |
| Memory Support | Up to 32 GB DDR3 ECC Unbuffered (UDIMM), 4 slots |
| Chipset | Intel C224 |
| Expansion Slots | 1 PCI-E 3.0 x16 (low-profile), 1 PCI-E 2.0 x4 (in x8) |
| Drive Bays | 4 x 3.5" SATA3 (hot-swap) |
| Network Interface | 2 x Intel I210 Gigabit Ethernet, 1 x dedicated IPMI LAN |
| Power Supply | 200 W AC-DC power supply |
| Management | IPMI 2.0 with virtual media over LAN |
| Cooling | 4 x 40mm heavy duty fans with fan speed control |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Certifications | FCC, CE, UL, RoHS |
| Spare Parts | Hot-swap fans, power supply, hard drive carriers, CMOS battery |
| Repairability | Modular design; replaceable components include PSU, fans, HDD, DIMMs |
| Safety Features | Rack mounting brackets included, intrusion detection switch, front bezel lock option |
Frequently Asked Questions - SuperServer 5018R-M Supermicro
How do I install the server in a rack?
Attach the provided rack rails to the server and rack posts using screws. Ensure the server is level and securely fastened. Connect all cables before sliding into the rack to avoid strain.
What type of memory does the 5018R-M support?
It supports DDR3 ECC Unbuffered (UDIMM) memory with speeds up to 1600 MHz. Maximum capacity is 32 GB across 4 DIMM slots.
Can I use a standard ATX power supply?
No, the server uses a proprietary 200 W power supply unit designed for 1U form factor. Use only Supermicro-certified PSUs for replacement.
How do I access the BIOS?
Press the Delete key during POST to enter BIOS setup. You can configure boot order, hardware settings, and enable features like Intel VT-x.
What is the default IPMI IP address?
The default IPMI LAN IP is 192.168.1.10. You can change it via the BIOS or IPMI utility after connecting to the dedicated management port.
How do I replace a failed hard drive?
The drives are hot-swappable. Unlock the drive carrier handle, pull the drive out, insert a new drive of the same type, and lock the handle. The RAID controller will rebuild automatically if configured.
What is the maximum operating temperature?
The recommended operating temperature is 10°C to 35°C (50°F to 95°F). Ensure proper airflow and ambient temperature control in the rack.
How do I clean the server?
Power off the server and unplug it. Use compressed air to remove dust from fans, heatsinks, and air filters. Do not use liquids or vacuum cleaners inside the chassis.
Can I install a dedicated GPU?
The server has one low-profile PCI-E 3.0 x16 slot that can accommodate a single-slot low-profile GPU. Power draw must not exceed 75 W from the PCIe slot.
How do I reset the IPMI password?
You can reset IPMI settings via the BIOS (Advanced > IPMI Configuration) or by using a jumper on the motherboard. Refer to the manual for the exact jumper location (JP_BMC).
User questions about SuperServer 5018R-M Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barbecue in PDF format for free! Find your manual SuperServer 5018R-M - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 5018R-M by Supermicro.