ARTG54LHTDP - Air-conditioner FUJITSU - Free user manual and instructions
Find the device manual for free ARTG54LHTDP FUJITSU in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model | ARTG54LHTDP |
| Brand | Fujitsu |
| Cooling Capacity | 5400 W (18,400 BTU/h) |
| Heating Capacity | 6000 W (20,500 BTU/h) |
| Energy Efficiency Ratio (EER) | 3.2 |
| Indoor Unit Dimensions (WxHxD) | 900 x 300 x 220 mm |
| Indoor Unit Weight | 12 kg |
| Outdoor Unit Dimensions (WxHxD) | 800 x 600 x 300 mm |
| Outdoor Unit Weight | 35 kg |
| Power Supply | 220-240 V, 50 Hz, 1 Phase |
| Power Consumption (Cooling) | 1700 W |
| Refrigerant Type | R32 |
| Functions | Cooling, Heating, Dehumidification, Fan Only, Auto Mode |
| Filters | Washable Pre-Filter, Anti-Allergen Filter |
| Noise Level (Indoor) | 22 - 42 dB(A) |
| Noise Level (Outdoor) | 50 dB(A) |
| Maintenance | Clean filters every 2 weeks; professional service annually |
| Safety Features | Overheat Protection, Auto Restart, Child Lock |
| Warranty | 2 years parts and labor |
Frequently Asked Questions - ARTG54LHTDP FUJITSU
How often should I clean the air conditioner filters?
It is recommended to clean the filters every two weeks during regular use. A dirty filter reduces efficiency and air quality. Refer to the manual for instructions on removing and cleaning the washable pre-filter.
Can I install the indoor unit myself?
Installation should be performed by a qualified professional to ensure proper refrigerant handling, electrical connections, and drainage. Improper installation may void the warranty and cause safety hazards.
What is the ideal temperature setting for energy saving?
For cooling, set the thermostat to 24-26°C (75-78°F). For heating, 20-22°C (68-72°F). Using energy-saving mode can further reduce power consumption.
Why is my air conditioner not cooling properly?
Common causes include dirty filters, blocked outdoor unit, low refrigerant, or incorrect thermostat setting. First, check and clean the filters. If the problem persists, contact a service technician.
How do I use the timer function?
Press the TIMER button on the remote control. Use the +/- buttons to set the desired on/off time. The timer can be programmed up to 24 hours in advance. Refer to the remote control section of the manual.
What type of refrigerant does this unit use?
The Fujitsu ARTG54LHTDP uses R32 refrigerant, which is environmentally friendly with low global warming potential. Always use only the specified refrigerant for servicing.
Can I use the air conditioner in winter for heating?
Yes, this model is a heat pump and provides heating even at low outdoor temperatures. For temperatures below -10°C (14°F), performance may decrease; consider auxiliary heating.
How do I reset the remote control?
Remove the batteries and press any button for 5 seconds to discharge residual power. Insert fresh batteries. If still not working, try pointing the remote directly at the indoor unit's receiver.
What does the 'Auto' mode do?
In Auto mode, the air conditioner automatically selects cooling or heating based on the room temperature compared to the set temperature. It maintains comfort without manual switching.
How can I reduce noise from the outdoor unit?
Ensure the outdoor unit is installed on a stable, level surface. Use vibration-absorbing pads. Keep the unit free from obstructions and clean the coils regularly to prevent excessive noise.
User questions about ARTG54LHTDP FUJITSU
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual ARTG54LHTDP - FUJITSU and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARTG54LHTDP by FUJITSU.