Wandvac System WS620 - Vacuum Cleaner SHARK - Free user manual and instructions
Find the device manual for free Wandvac System WS620 SHARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Stick Vacuum |
| Brand | Shark |
| Model | Wandvac System WS620 |
| Dimensions (approx.) | 10.2 x 7.1 x 25.6 inches (26 x 18 x 65 cm) |
| Weight (approx.) | 7.5 lbs (3.4 kg) |
| Power Source | Rechargeable Lithium-Ion Battery (18V, 2500 mAh) |
| Battery Runtime | Up to 30 minutes (standard mode) |
| Charging Time | Approximately 4.5 hours |
| Dust Cup Capacity | 0.68 quarts (0.65 liters) |
| Filtration System | HEPA washable filter |
| Suction Power | 60 Air Watts (approx.) |
| Attachments Included | Crevice tool, dusting brush, pet tool |
| Usage Type | Hard floors, carpets, upholstery |
| Noise Level | 78 dB (approx.) |
| Maintenance | Clean and replace filters every 3-6 months; empty dust cup after each use |
| Battery Type | Removable, replaceable |
| Safety Features | Overheat protection, automatic shutoff when battery low |
| Repairability | Yes; spare parts available (battery, filter, brushroll, charger) |
| Warranty | 2 years limited warranty |
| Recommended Use | Everyday quick cleaning of small to medium homes |
Frequently Asked Questions - Wandvac System WS620 SHARK
How do I assemble the Shark Wandvac WS620?
Slide the handle into the main body until it clicks. Attach the desired tool to the wand. Refer to the manual for detailed steps.
How do I charge the battery?
Plug the charger into the wall and connect to the battery port on the vacuum. The LED indicator will blink during charging and stay solid when fully charged (about 4.5 hours).
Why is the suction weak?
First, empty the dust cup and clean the filter. Also check for clogs in the wand or brushroll. If weak suction persists, the battery may need replacing.
How do I clean the HEPA filter?
Remove the filter and tap it gently over a trash bin. Rinse with cold water (no soap) and let it air dry for 24 hours before reinserting. Replace every 3-6 months.
Can I use the vacuum on hardwood floors?
Yes, the WS620 is safe for hardwood floors. Use the bare floor setting if available, and avoid using the brushroll on delicate surfaces.
What attachments come with the WS620?
It includes a crevice tool for tight spaces, a dusting brush for furniture, and a pet tool for removing pet hair from upholstery.
How do I know when the battery is fully charged?
The LED on the vacuum will turn solid green when fully charged. Blinking red indicates charging, and a steady red means low battery.
Can I replace the battery myself?
Yes, the battery is detachable. Press the release button and slide it out. Replacement batteries are available from Shark or authorized retailers.
The brushroll stopped spinning—what should I do?
Check for hair or debris wrapped around the brushroll. Clean it using the built-in brush assist cutter or manually. Also ensure the brushroll button is pressed to activate.
How do I store the vacuum?
The WS620 can be stored upright with the wall mount provided. Alternatively, detach the wand and store flat. Keep in a dry place.
User questions about Wandvac System WS620 SHARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Wandvac System WS620 - SHARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Wandvac System WS620 by SHARK.