ADAM-2510Z - Router Advantech - Free user manual and instructions
Find the device manual for free ADAM-2510Z Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Router / Gateway |
| Model | ADAM-2510Z |
| Brand | Advantech |
| Dimensions (W x H x D) | 110 x 80 x 35 mm |
| Weight | 250 g |
| Power Input | 9 – 36 VDC |
| Power Consumption | 5 W max |
| Ethernet Ports | 1 x 10/100 Base-T |
| Serial Ports | 1 x RS-232, 1 x RS-485 |
| Wireless Protocol | Zigbee (2.4 GHz) |
| Antenna Connector | External SMA (female) |
| Operating Temperature | -40 to 85 °C |
| Mounting | DIN rail or panel mount |
| Enclosure Rating | IP30 |
| Certifications | CE, FCC |
| Communication Protocols | TCP/IP, Modbus, Modbus/TCP |
| Data Logging | Supports internal log |
| Maintenance & Cleaning | Wipe with dry cloth; avoid liquids |
| Safety | Use only specified power supply; keep away from moisture |
| Spare Parts & Repairability | Contact Advantech support; self-repair only as per manual |
| General Information | Industrial-grade wireless router for automation |
Frequently Asked Questions - ADAM-2510Z Advantech
How to reset the ADAM-2510Z to factory defaults?
Press and hold the Reset button (located on the front panel) for at least 10 seconds until the LED flashes. Release; the device will reboot with factory settings.
How to access the web configuration interface?
Connect your PC to the same network as the router. Open a browser and enter the default IP address (typically 192.168.1.1). Login with default credentials (admin/admin).
What is the default IP address and login?
Default IP: 192.168.1.1. Username: admin, Password: admin (case-sensitive).
How to connect the router to a Zigbee network?
Use the web interface to enable Zigbee coordinator mode. Then pair devices by putting them into learn mode and pressing the Join button on the ADAM-2510Z.
How to update the firmware?
Download the latest firmware from Advantech's website. In the web interface, go to System > Firmware Upgrade, select the file, and click Start Upgrade. Do not power off during the process.
Can the ADAM-2510Z act as a Modbus gateway?
Yes, it supports Modbus RTU (via RS-485) and Modbus/TCP (via Ethernet). Configure the mapping in the Modbus Gateway section of the web interface.
What is the maximum baud rate for serial ports?
The RS-232 and RS-485 ports support baud rates up to 115200 bps.
How to mount the device on a DIN rail?
Attach the DIN rail clip (included) to the back of the unit. Press the clip onto the rail until it snaps into place. Use a screwdriver to lift the clip for removal.
What should I do if the device has no power?
Check the power supply (9-36 VDC) and connections. Ensure the Power LED is on. If not, test with a known good supply. If still off, contact support.
How to interpret the LED indicators?
Power (green): on when powered. Link/Act (green): blinks with Ethernet traffic. Zigbee (green): solid when connected to Zigbee network; blinks during pairing. Serial (green): blinks on serial data activity.
User questions about ADAM-2510Z Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual ADAM-2510Z - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADAM-2510Z by Advantech.