DSA-3200 - Router D-LINK - Free user manual and instructions
Find the device manual for free DSA-3200 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | D-Link |
| Model | DSA-3200 |
| Dimensions (W x D x H) | 200 x 140 x 30 mm |
| Weight | 400 g |
| Power Supply | 12V DC, 1A |
| Number of Ethernet Ports | 4 x Gigabit LAN, 1 x Gigabit WAN |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Wireless Speed | Up to 1200 Mbps |
| VPN Support | Yes (IPSec, PPTP, L2TP) |
| Firewall Features | SPI, DoS prevention, MAC filtering |
| Antenna Type | External detachable (2 x RP-SMA) |
| USB Ports | 1 x USB 2.0 |
| Mounting Type | Desktop, wall-mountable |
| Maintenance | Keep in a well-ventilated area; clean with dry cloth |
| Security | WPA2-PSK, WPA3 support; disable WPS when not in use |
| Spare Parts / Repairability | Contact D-Link support; parts available through authorized service centers |
| General Information | Designed for small office/home office use |
Frequently Asked Questions - DSA-3200 D-LINK
How do I reset the D-Link DSA-3200 to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold it for about 10 seconds until the power LED blinks. The router will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.0.1. Username: admin, Password: admin (unless changed). For security, change the password after first login.
How can I update the firmware on my DSA-3200?
Log into the web interface, go to System > Firmware Update. Download the latest firmware from D-Link's support site and upload it. Do not power off during update.
Does the DSA-3200 support guest Wi-Fi networks?
Yes. You can enable a guest network in the wireless settings. It provides internet access without giving access to your main network.
How do I set up a VPN on this router?
Go to VPN > IPSec or PPTP. Configure the required settings such as server IP, pre-shared key, and user credentials. Refer to the manual for detailed steps.
What should I do if I forget my router password?
Perform a hard reset to factory defaults (see FAQ on reset). This will clear the password. Then log in with the default credentials and set a new password.
Can I use the DSA-3200 with a cable modem?
Yes. Connect the cable modem to the WAN port of the router using an Ethernet cable. Then configure the internet connection type (e.g., DHCP, PPPoE) in the web interface.
How do I enable parental controls?
In the web interface, go to Access Control > Website Filter. You can block specific websites or set time limits for internet access.
What is the range of the Wi-Fi signal?
Indoor range is typically up to 100 meters for 2.4 GHz and 50 meters for 5 GHz, depending on obstacles. For better coverage, place the router centrally and avoid interference.
Is the DSA-3200 compatible with mesh systems?
No, this router does not support mesh networking. It can be used as a standalone router or as an access point with appropriate settings.
User questions about DSA-3200 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual DSA-3200 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSA-3200 by D-LINK.