ScreenPlay 7210 - Video projector INFOCUS - Free user manual and instructions
Find the device manual for free ScreenPlay 7210 INFOCUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater Video Projector |
| Brand | InFocus |
| Model | ScreenPlay 7210 |
| Display Technology | DLP |
| Native Resolution | 1280 x 720 (720p) |
| Brightness (Lumens) | 1000 ANSI lumens |
| Contrast Ratio | 2000:1 |
| Aspect Ratio | 16:9 (native) |
| Lamp Type | 200W P-VIP |
| Lamp Life (Normal) | 2000 hours |
| Lamp Life (Eco) | 3000 hours |
| Inputs | HDMI, Component, Composite, S-Video, VGA |
| Outputs | 12V trigger, RS-232 |
| Keystone Correction | Vertical: ±15° |
| Zoom Ratio | 1.2:1 |
| Throw Ratio | 1.5 – 1.8:1 |
| Projection Distance | 3.3 – 39.4 ft (1 – 12 m) |
| Image Size (Diagonal) | 30 – 300 inches |
| Dimensions (W x D x H) | 15.2 x 10.6 x 5.3 inches (386 x 269 x 135 mm) |
| Weight | 9.5 lbs (4.3 kg) |
| Power Consumption | 300W (max), <1W (standby) |
| Noise Level | 34 dB (normal), 30 dB (eco) |
| Security | Kensington lock slot, password protection |
| Maintenance | Air filter cleaning every 100 hours; lamp replacement |
| Speakers | 1 x 3W mono |
Frequently Asked Questions - ScreenPlay 7210 INFOCUS
How do I replace the lamp on the InFocus ScreenPlay 7210?
Turn off the projector and unplug it. Wait 30 minutes for cooling. Remove the lamp cover screw, open cover, unscrew the lamp module, pull it out by the handle, insert new lamp, tighten screws, close cover, and reset the lamp timer via the menu: Menu -> Settings -> Lamp Timer Reset.
What is the native resolution of the ScreenPlay 7210?
The native resolution is 1280 x 720 (720p). It can accept up to 1080p signals but scales them to 720p.
How far should the projector be from the screen?
For a 100-inch diagonal image, the distance is approximately 11.5 to 14 feet (3.5 to 4.3 m). Use the throw ratio of 1.5-1.8:1 to calculate for different sizes.
How do I clean the air filter?
Turn off and unplug the projector. Locate the filter on the side, gently remove it, vacuum or rinse with water (dry completely), then reinsert. Clean every 100 hours of use.
Why does my projector display 'Lamp Error'?
This indicates a lamp issue. First, check if the lamp cover is securely closed. If it is, the lamp may need replacement. Reset the lamp timer after replacing. If error persists, contact InFocus support.
Can I connect a Blu-ray player to this projector?
Yes, use an HDMI cable for best quality. The projector accepts 1080p signals and downscales to 720p. Composite or component connections also work but at lower quality.
What is the recommended screen size?
The projector supports images from 30 to 300 inches diagonal. Best results are achieved between 80 and 120 inches depending on ambient light.
How do I adjust the keystone correction?
Press the Keystone button on the remote or access Menu -> Settings -> Keystone. Use the arrow keys to correct vertical distortion up to ±15°.
Does the ScreenPlay 7210 have built-in speakers?
Yes, it has a single 3-watt mono speaker suitable for basic audio. For better sound, connect external speakers via the audio output or use HDMI audio passthrough.
How do I reset the lamp timer?
After replacing the lamp, go to Menu -> Settings -> Lamp Reset, select 'Yes' or press Enter. Confirm to reset the timer to zero. This allows accurate tracking of lamp life.
User questions about ScreenPlay 7210 INFOCUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual ScreenPlay 7210 - INFOCUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ScreenPlay 7210 by INFOCUS.