PLC-WL2503SE2 - Video projector SANYO - Free user manual and instructions
Find the device manual for free PLC-WL2503SE2 SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Video Projector (LCD) |
| Model | PLC-WL2503SE2 |
| Brand | Sanyo |
| Display Technology | 3LCD |
| Resolution | WXGA (1280 x 800) |
| Brightness | 2500 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lamp Type | UHP Lamp |
| Lamp Life | Up to 2000 hours (Normal Mode) |
| Keystone Correction | Vertical: +/- 30 degrees |
| Zoom Ratio | 1.2x Manual Zoom |
| Inputs | HDMI, VGA, S-Video, Composite Video, Audio |
| Outputs | VGA Monitor Out, Audio Out |
| Dimensions (W x H x D) | 333 x 107 x 272 mm |
| Weight | 2.9 kg |
| Power Consumption | 250W (Standby: 0.5W) |
| Power Supply | AC 100-240V, 50/60Hz |
| Noise Level | 35 dB (Normal Mode) |
| Features | Digital Zoom, Auto Setup, Sleep Timer, Presentation Timer |
| Cleaning | Clean the lens with a soft, dry cloth. Clean the air filter every 500 hours. |
| Safety | Do not look into the lens. Ensure proper ventilation. Use only authorized lamp replacements. |
| Repairability | Lamp and filter are user-replaceable. Other repairs should be done by qualified technicians. |
Frequently Asked Questions - PLC-WL2503SE2 SANYO
How do I replace the lamp on the Sanyo PLC-WL2503SE2?
Turn off the projector and unplug it. Let it cool for at least 45 minutes. Remove the lamp cover on the bottom, loosen the lamp screws, and pull out the old lamp. Insert the new lamp (replacement type: Sanyo original lamp), tighten screws, and replace the cover. Reset the lamp timer via the menu.
What is the maximum resolution supported?
The native resolution is WXGA (1280 x 800). It can accept signals up to 1920 x 1080 (1080p) but will scale them to native resolution.
Can I connect a laptop to the projector?
Yes, use the VGA input or HDMI input. For VGA, connect the cable to your laptop's VGA port. For HDMI, use an HDMI cable. Select the correct input source using the Source button.
How do I clean the air filter?
Turn off the projector and unplug it. Locate the filter cover (usually on the side). Remove the filter and vacuum it gently. Do not wash it. If damaged, replace with a new filter. Reinstall and reset the filter timer.
Why is the image not clear or out of focus?
Adjust the focus ring on the lens. Ensure the projector is at the correct distance (refer to projection charts). Also, check if the keystone correction is needed. Clean the lens if dirty.
What is the lamp life and how to check usage?
The lamp lasts up to 2000 hours in normal mode. To check usage, go to the menu under 'Information' or 'Lamp Hours'. Replace the lamp when it nears the end of life or when the indicator lights up.
Can I use a universal remote with this projector?
Yes, if the remote supports Sanyo projectors. The projector uses IR signals. Set the remote to the correct code for Sanyo PLC-WL series.
How do I set up the projector for a presentation?
Place the projector on a stable surface, connect your source via HDMI or VGA, power on, and adjust focus/keystone. Use the menu to select aspect ratio and input source. You can also use the remote's 'Auto' button to optimize.
What should I do if the projector overheats?
Check if the air filter is clogged. Ensure ventilation slots are not blocked. Place the projector in a cool, well-ventilated area. If the problem persists, the fan may need servicing.
How to access the service menu?
Press the 'Menu' button on the remote or projector. Use arrow keys to navigate. The service menu is for advanced settings; refer to the full manual for detailed instructions.
User questions about PLC-WL2503SE2 SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual PLC-WL2503SE2 - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-WL2503SE2 by SANYO.