PSU6-SAA - Power Supply BEHRINGER - Free user manual and instructions

Product Type	Replacement Power Supply
Brand	Behringer
Model	PSU6-SAA
Input Voltage	230 V AC, 50/60 Hz
Output Voltage	15 V DC (typical for compatible mixers)
Compatible Models	UB1002FX, UB1202FX, XENYX 1002FX, XENYX 1202FX, QX1002USB, QX1202USB
Dimensions (Approx.)	100 x 50 x 30 mm
Weight (Approx.)	200 g
Warranty	3 years
Region	Australia (SAA plug)
Designed by	Behringer Germany
Safety Features	Overcurrent, overvoltage, short-circuit protection (typical)
Installation	Plug and play; use only with specified Behringer mixers
Maintenance	Keep dry, avoid dust, unplug during cleaning
Spare Parts Availability	Contact Behringer service centers for replacement
Certifications	CE, SAA (Australia)

Frequently Asked Questions - PSU6-SAA BEHRINGER

What devices is the PSU6-SAA compatible with?

The PSU6-SAA is designed to replace the original power supply for UB1002FX, UB1202FX, XENYX 1002FX, XENYX 1202FX, QX1002USB, and QX1202USB Behringer mixers.

Is this power supply compatible with 110V outlets?

No, the PSU6-SAA is specifically for 230 V AC mains voltage and has an SAA plug for Australia. Using it on 110V may cause damage.

What is the output voltage of the PSU6-SAA?

The output is typically 15 V DC (check your mixer's label for exact requirements) and provides sufficient current for the listed mixers.

Does this power supply come with a warranty?

Yes, it is covered by Behringer's 3-Year Warranty Program, subject to terms and conditions.

Can I use the PSU6-SAA with other Behringer mixers?

It is only recommended for the models listed on the product label. Using it with other devices may cause improper operation or damage.

What are the dimensions and weight of the power supply?

Approximate dimensions are 100 x 50 x 30 mm and weight around 200 g (actual may vary slightly).

How do I clean or maintain the PSU6-SAA?

Unplug the unit before cleaning. Use a dry cloth to wipe the exterior. Avoid moisture and dust buildup near the vents.

What should I do if my PSU6-SAA fails?

Contact Behringer support in your region. Under warranty, you may receive a replacement unit. Do not attempt to open or repair it.

Is the PSU6-SAA a genuine Behringer product?

Yes, it is an official replacement part designed and manufactured by Behringer to meet original specifications.

Where can I buy the PSU6-SAA?

It is available through authorized Behringer dealers and online retailers. Check the Behringer website for regional distributors.

USER MANUAL PSU6-SAA BEHRINGER

230 V SAA Replacement Power Supply for UB1002FX, UB1202FX, XENYX (1002FX, 1202FX), QX1002USB and QX1202USB

Replacement Power Supply for UB1002FX, UB1202FX, XENYX (1002FX, 1202FX), QX1002USB, QX1202USB
3-Year Warranty Program*
Conceived and designed by BEHRINGER Germany

The PSU6-SAA powersupply is identical to the one that came with the products listed above, and is required for proper operation in your part of the world. We offer a wide range of region-specific Replacement Power Supplies designed specifically for your BEHRINGER device.

Exterior view of a BEVIX audio workstation (no visible text or labels)

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

PSU6-SAA

230 V SAA Replacement

Power Supply for UB1002FX,

UB1202FX, XENYX (1002FX, 1202FX),

QX1002USB and QX1202USB

For service, support or more information contact the BEHRINGER location nearestyou:

Europe

MUSIC Group Services UK

Tel:[phone]

Email: [e-mail]

USA/Canada

MUSIC Group Services NV Inc.

Tel: [phone]

Email: [e-mail]

Japan

MUSIC Group Services JP K.K

Tel.: [phone]

Email: [e-mail]

MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, applications and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of 1 MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2015 All rights reserved.

behringer