WBS8T725V - Loudspeaker Bogen - Free user manual and instructions

Product Type	Wall Baffle Speaker
Brand	Bogen
Model	WBS8T725V
Dimensions (Width x Height x Depth)	9-1/2" x 9-1/2" x 5-1/4" (top), 3-1/4" (bottom)
Shipping Weight (per carton of 4)	18 lb.
Power Taps	4, 2, 1, 1/2, 1/4, 1/8 watts (selectable)
Compatible Amplifier Outputs	25V and 70V
Speaker Driver	8" cone with 6 oz. ceramic magnet
Frequency Response	50 Hz – 12 kHz
Sensitivity (at 4 ft/1W)	95 dB SPL
Downward Angle	13.5 degrees
Volume Control	Recessed (V model only)
Enclosure Material	3/8" particle board with simulated walnut vinyl finish
Grille	Black cloth
Mounting	Wall mount, hardware included
Maintenance	Wipe with dry cloth; do not use liquids or abrasives
Safety	Install in accordance with local electrical codes; disconnect power before wiring
Repair	No user-serviceable parts; contact qualified service personnel

Frequently Asked Questions - WBS8T725V Bogen

What power taps are available on the WBS8T725V?

The speaker offers six power taps: 4, 2, 1, 1/2, 1/4, and 1/8 watts. These are selectable at the transformer.

Can I use this speaker with a 25V or 70V amplifier?

Yes, the transformer is designed to work with both 25V and 70V amplifier outputs.

Does the WBS8T725V come with a volume control?

Yes, the 'V' in the model number indicates a recessed volume control is included.

What are the dimensions of this speaker?

The speaker measures 9-1/2 inches wide, 9-1/2 inches high, and has a depth of 5-1/4 inches at the top and 3-1/4 inches at the bottom.

How is the speaker mounted?

It is designed for wall mounting and includes mounting hardware. The face is angled downward 13.5 degrees for optimal sound dispersion.

What is the frequency response of the WBS8T725V?

The frequency response is 50 Hz to 12 kHz.

What type of finish does the enclosure have?

The enclosure has a simulated walnut vinyl finish with a black grille cloth on the front.

Is the speaker suitable for outdoor use?

The manual does not specify outdoor rating. It is intended for indoor surface mounting.

How do I clean the speaker?

Wipe the exterior with a dry cloth. Do not use liquids or abrasive cleaners.

What is the sensitivity of this speaker?

Sensitivity is 95 dB SPL measured at 1 watt and 4 feet.

USER MANUAL WBS8T725V Bogen

Wall Baffle Wooden Speaker Assemblies

Models WBS8T725 & variations, WBS810T725

Black rectangular electronic device with textured surface and 'KOPON' logo at bottom (no readable text or symbols on body)

WBS8T725

Description

Bogen Wall Baffle Speakers consist of 8" cone speakers (S86 or S810) pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front. These wall baffles are handsomely styled and ruggedly built with 3/8" particle board reinforced at the corners. Designed for wall mounting, the face is angled downward 13.5 degrees. Available options include recessed volume control and terminal strip.

Features

• 4-watt capacity
• 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts)
• Works with both 70V and 25V amplifier outputs
• Simulated walnut finish
• Pre-assembled for faster installation

• 8" cone speaker for excellent audio quality

• 6 oz. or 10 oz. magnet weights

• Recessed volume control available (V models only)
• Screw terminals available (BR models only)
• Easy wall-mount installation
• Mounting hardware included

Technical Specifications

Model	Power Taps (in Watts)	Frequency Response	Sensitivity (4 ft./1W)	Magnet Weight	No Volume Control	Recessed Volume Control (V)	Screw Terminals (BR)	Shipping Weight (4/Carton)	Dimensions
WBS8T725	4, 2, 1, 1/2, 1/4, 1/8 @25V & 70V	50 Hz-12 kHz	95 dBspl	6 oz.	●			18 lb. / carton	9-1/2" W x 9-1/2" H x 5-1/4" D (3-1/4" D @ bottom)
WBS8T725V						●
WBS8T725BR					●		●
WBS8T725BRV						●	●	19 lb. / carton
WBS810T725		70 Hz-15 kHz	96 dBspl	10 oz.	●			20 lb. / carton

Architect and Engineer Specifications

WBS8T725 The surface-mounting loudspeaker assembly shall be a Bogen model WBS8T725 (or WBS8T725V, WBS8T725BR, or WBS8T725BRV), or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50 Hz to 12 kHz. Axial sensitivity shall be 95 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 6 oz. ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length.

The loudspeaker shall be assembled in a wall baffle for surface mounting, angled 13.5 degrees for downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D (top) x 3-1/4"D (bottom).

(For WBS8T725V add) The assembly shall include a control for adjusting the volume of the loudspeaker.

(For WBS8T725BR add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8-watt power connection.

(For WBS8T725BRV add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8-watt power connection. A control shall also be included for adjusting the volume of the loudspeaker.

WBS810T725 The surface mounting loudspeaker shall be a Bogen model WBS810T725, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 70 Hz to 15 kHz. Axial sensitivity shall be 96 dB, measured at 1-watt/4-feet. The loudspeaker shall have a 10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length.

The loudspeaker shall be assembled in a wall baffle for surface mounting, angled 13.5 degrees for downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D (top) x 3-1/4"D (bottom).

Line Drawings

BOGEN® COMMUNICATIONS, INC.

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel: [phone]; FAX: [phone]; www.bogen.com