CK3XNI - PDA Intermec - Free user manual and instructions
Find the device manual for free CK3XNI Intermec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rugged PDA |
| Brand | Intermec |
| Model | CK3XNI |
| Operating System | Windows Embedded Handheld 6.5 |
| Processor | Marvell PXA320 624 MHz |
| Memory | 256 MB RAM / 512 MB Flash |
| Display | 3.5-inch TFT color, 240x320 pixels |
| Keypad | QWERTY numeric keypad with backlight |
| Dimensions | 200 mm x 85 mm x 40 mm (7.9 x 3.3 x 1.6 in) |
| Weight | Approximately 400 g (14.1 oz) |
| Power Supply | Rechargeable Li-Ion battery, 7.4V, 4000 mAh |
| Battery Life | Up to 10 hours (typical usage) |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g/n, Bluetooth Class II |
| Scanner | Integrated 1D/2D imager (e.g., EA31) |
| Environmental Rating | IP54 or higher (intrinsically safe variant) |
| Drop Specification | Withstands multiple drops from 1.5 m (5 ft) onto concrete |
| Main Functions | Barcode scanning, data entry, voice communication, inventory management |
| Cleaning Method | Wipe with a soft, dry cloth; mild detergent if necessary |
| Safety | Intrinsically safe for hazardous locations (Class I Division 1) |
| Spare Parts Availability | Replacement batteries, chargers, stylus, keypad modules |
| Repairability | Modular design; user-replaceable battery, SD card, and SIM |
| General Information | Supports ActiveSync/Windows Mobile Device Center for PC sync |
Frequently Asked Questions - CK3XNI Intermec
How do I perform a hard reset on the CK3XNI?
Press and hold the Power button and the 1 key simultaneously for about 5 seconds until the device vibrates and restarts.
How do I scan a barcode?
Aim the scanner window at the barcode and press the Scan key (usually on the side or front). A beep confirms a successful read.
How can I connect to a Wi-Fi network?
Go to Start > Settings > Connections > Wi-Fi. Select your network, enter the password, and tap Connect.
How do I change the battery?
Turn off the device. Slide the battery lock to the unlock position, lift the battery out, and insert a charged one until it clicks. Lock the latch.
What is the proper way to clean the device?
Use a soft, lint-free cloth slightly dampened with mild soap and water. Avoid abrasive cleaners. Do not spray directly onto the device.
How can I update the operating system or firmware?
Download the latest update from Intermec support website. Run the installer while the device is connected via USB and synced.
What does the warranty cover?
The standard warranty covers manufacturing defects for one year from purchase. Extended warranty plans are available.
Where can I find accessories like chargers and cables?
Visit the Intermec accessories store or contact an authorized reseller. Common accessories include vehicle cradles, spare batteries, and holsters.
Why is the device not turning on?
Check if the battery is charged. If not, charge for at least 30 minutes. Try a hard reset. If still no response, contact support.
How do I sync the CK3XNI with my computer?
Install ActiveSync (Windows XP/7) or Windows Mobile Device Center (Vista/10). Connect via USB and follow the on-screen setup.
User questions about CK3XNI Intermec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your PDA in PDF format for free! Find your manual CK3XNI - Intermec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CK3XNI by Intermec.
