StarFlash 150 - Lighting Photoflex - Free user manual and instructions
Find the device manual for free StarFlash 150 Photoflex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Studio Monolight Flash |
| Model | StarFlash 150 |
| Brand | Photoflex |
| Power Output | 150 Ws |
| Guide Number (ISO 100, 2m) | Approximately 45 (with reflector) |
| Recycle Time | 1.5 - 2.5 seconds |
| Flash Duration | 1/800 - 1/2000 s (depending on power level) |
| Color Temperature | 5600 K (+/- 200 K) |
| Modeling Lamp | 150W halogen (dimable) |
| Power Control | Variable in 1/10 stop increments (5 stops range) |
| Triggering | Sync cord, built-in slave, or optional wireless trigger |
| Dimensions (with reflector mount) | Approximately 30 x 25 x 25 cm |
| Weight | Approximately 2.5 kg (without accessories) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Fuse | 8A (internal, replaceable) |
| Mount Type | Bowens S-type compatible |
| Fan Cooling | Built-in, temperature controlled |
| Audible Alert | Recycle ready beep (can be disabled) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Included Accessories | Reflector, sync cord, power cord, protective cap, manual |
| Maintenance | Keep vents clean; wipe with dry cloth; avoid moisture |
| Safety Certifications | CE, RoHS |
| Repair/Spare Parts | Contact authorized service centers; common parts available |
Frequently Asked Questions - StarFlash 150 Photoflex
How do I connect the StarFlash 150 to my camera?
You can connect via a sync cord (PC sync) using the sync port on the flash, or use a wireless trigger. The flash also has a built-in optical slave that fires when it detects another flash.
Can I use any softbox with this flash?
Yes, the StarFlash 150 uses a Bowens S-type mount, which is compatible with most softboxes and modifiers from Photoflex and other brands.
What is the recycle time and how can I reduce it?
Recycle time is typically 1.5-2.5 seconds at full power. To reduce it, lower the power output or use a faster power supply (if available). Ensure the flash is not overheated.
How do I clean the flash unit?
Turn off and unplug the unit. Use a dry, soft cloth to wipe the exterior. Do not use solvents or liquids. Keep the ventilation grills clear of dust.
Why does the modeling lamp flicker?
Flickering may occur if the lamp is loose or reaching end of life. Turn off and check the connection. If loose, tighten; if damaged, replace with a 150W halogen lamp.
Can I use the flash continuously at full power?
The flash has a fan to manage heat, but continuous full-power firing may cause overheating. Allow brief pauses between bursts to prevent thermal shutdown.
Does the StarFlash 150 have a voltage stabilizer?
Yes, it includes a voltage regulator to maintain consistent color temperature and flash output across varying mains voltages.
How do I replace the fuse?
Unplug the unit. Locate the fuse holder near the power inlet. Use a small flathead screwdriver to open it. Replace with an 8A 250V fuse of the same type.
What is the flash duration?
Flash duration varies with power: at full power it's about 1/800s, at lower powers it shortens to 1/2000s, ideal for freezing motion.
Can I use this flash for outdoor photography?
Yes, but it requires AC power. You can use a portable power pack (e.g., battery/inverter) rated for 150W continuous draw. Ensure the power source is weather-protected.
User questions about StarFlash 150 Photoflex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual StarFlash 150 - Photoflex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. StarFlash 150 by Photoflex.