ME-650-C - Pregnant KLIPSCH - Free user manual and instructions

Product Type	In-Ceiling Speaker
Brand	Klipsch
Model	ME-650-C
Dimensions (Diameter x Depth)	8.5 in x 3.5 in (216 mm x 89 mm)
Cutout Diameter	7.5 in (191 mm)
Weight	2.5 lb (1.1 kg)
Power Handling (RMS / Peak)	50 W / 100 W
Frequency Response	50 Hz – 20 kHz (±3 dB)
Impedance	8 ohms
Sensitivity	92 dB @ 1W/1m
Driver Complement	6.5 in (165 mm) Woofer, 1 in (25 mm) Tweeter
Enclosure Material	ABS Plastic
Grille	Magnetically Attached, Paintable
Tweeter	Pivoting Design for Directed Sound
Installation	Dog-Ear Clamp System for Easy Ceiling Mount
Safety Certifications	UL Listed, CE Compliant
Wiring	Spring-Loaded Terminals (Accepts 14-18 AWG)
Weather Resistance	Indoor Use Only
Cleaning Instructions	Wipe with a Soft, Dry Cloth

Frequently Asked Questions - ME-650-C KLIPSCH

What is the recommended amplifier power for the Klipsch ME-650-C?

The Klipsch ME-650-C handles up to 50 watts RMS and 100 watts peak. Use an amplifier with 10-100 watts per channel for optimal performance.

What is the cutout size required for installation?

You need a 7.5-inch (191 mm) diameter cutout. The speaker's dog-ear clamps secure it to the ceiling.

Can the tweeter be angled for better sound staging?

Yes, the 1-inch pivoting tweeter can be rotated and angled to direct sound toward the listening area.

Is the grille paintable?

Yes, the magnetic grille is paintaBle. Remove it before painting and use thin coats to avoid clogging the holes.

What type of wire should I use for connection?

Use 14-18 AWG speaker wire. Strip about 1/2 inch of insulation and insert into the spring-loaded terminals.

Is the ME-650-C suitable for outdoor use?

No, it is designed for indoor use only. For outdoor, consider Klipsch's weather-resistant models.

What is the frequency response of the speaker?

The frequency response is 50 Hz to 20 kHz (±3 dB), providing full-range sound suitable for music and home theater.

Can I use this speaker with a 70V system?

The ME-650-C is an 8-ohm speaker and is not designed for 70V systems. Use a standard home audio amplifier.

How do I clean the speaker?

Wipe the grille and housing with a soft, dry cloth. Do not use liquids or abrasive cleaners.

Does the speaker include installation hardware?

Yes, it comes with dog-ear clamps and mounting screws. You may need a drywall saw for the cutout.

USER MANUAL ME-650-C KLIPSCH

Designed to fit all Reference Series in-ceiling speakers with 6.5-inch woofers (except for the square models), the ME-650-C allows residential contractors to meet building codes as well as diminish the undesirable transfer of sound from one room to the other.

The ME-650-C is manufactured from high-grade cold-rolled steel and features a layer of insulation. It exceeds the one-hour fire-rating requirements and is designed to meet UL2043 requirements for installation in plenum spaces. This metal device has also been tested to meet UL 263, ASTM E119-98, NFPA 251, UBC 7-1 and ULC CAN/ULC-S101 - M89 standards.

The ME-650-C fits 16- or 24-inch stud spans. It also comes with all of the hardware needed for any installation application and provisions for standard conduit connections. Pre-drilled holes simplify the installation process and ensure that all safety requirements are met.

The optimized enclosure volume provides consistent acoustic performance regardless of construction variations. While the insulation exceeds fire requirements, it also reduces the sound transmission into adjacent spaces by at least 10dB.

The inside edge of the ME-650-C's mounting ring is color coded to match up with the corresponding Klipsch installation kit size code.

[426]

16.8

[127] 5

[426]

16.8

[338]

13.3

[.08]

.031

[457] 18

[27.9] 11

[215]

8.47

[425] 16.8

[387] 15.3

[426]

16.8

www.klipsch.com

1-800-KLIPSCH

All specifications are subject to change without notice. ©2006