XCubeNAS - Server Qsan - Free user manual and instructions
Find the device manual for free XCubeNAS Qsan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | Qsan |
| Model | XCubeNAS 3000 |
| Form Factor | 2U Rackmount |
| Dimensions (HxWxD) | 3.5 x 17.2 x 19.8 in (89 x 437 x 503 mm) |
| Weight (without drives) | 25.4 lbs (11.5 kg) |
| Power Supply | Dual Redundant 550W 80+ Gold |
| Processor | Intel Xeon D-1521 (4-core, 2.4 GHz) |
| Memory (RAM) | 16 GB DDR4 ECC, expandable to 128 GB |
| Storage Bays | 12 x 3.5" SATA/SAS hot-swappable |
| Supported Drive Types | HDD (SATA/SAS) and SSD |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60, JBOD |
| Connectivity | 4 x 1GbE, 2 x 10GbE SFP+, 2 x USB 3.0, 1 x HDMI |
| Operating System | QSAN QSM (Linux-based) |
| Management | Web GUI, CLI, SNMP, Email alerts |
| Cooling | 2 x 80mm hot-swappable fans |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Certification | CE, FCC, UL, RoHS |
| Warranty | 3 years limited |
| Maintenance | Replaceable fans, power supplies, and drives |
| Security | AES-256 encryption, user authentication, virus scanning |
| Spare Parts & Repairability | Available through Qsan and authorized resellers; modular design |
| General Information | Noise level: 35 dB(A) typical |
Frequently Asked Questions - XCubeNAS Qsan
How do I install hard drives into the Qsan XCubeNAS?
Slide the drive into an empty bay until it clicks. Secure the tray handle. The drive is hot-swappable; no power-off needed. Use compatible SATA/SAS drives.
How to configure RAID on the XCubeNAS?
Log into the web GUI, go to Storage > RAID Manager. Select disks and choose RAID level (0, 1, 5, 6, 10, 50, 60, JBOD). Click Create. The system will initialize.
How to access the XCubeNAS web interface?
Connect to the same network. Open a browser and enter the device's IP address (default: 169.254.1.1 or DHCP-assigned). Use admin/admin as default credentials.
How to reset the admin password?
Press the reset button on the rear panel for 5 seconds until the alarm sounds. The password resets to admin. Re-login and change it.
What is the default IP address?
The default IP is 169.254.1.1 if no DHCP server is found. Otherwise, check your router's DHCP client list.
Can I use SSDs in the XCubeNAS?
Yes, the XCubeNAS supports both HDD and SSD in SATA/SAS interface. Use SSDs for cache or all-flash configurations.
How to expand storage capacity?
Add more drives to empty bays and create a new volume or expand an existing one via the Storage Manager. The system supports online expansion.
How to perform a backup?
Use the built-in Backup & Restore app. Create a backup job to external USB, another NAS, or cloud. Schedule it as needed.
How to update firmware?
Download the latest firmware from Qsan support. In the web GUI, go to System > Firmware Update, upload the file, and follow prompts. The system will reboot.
What to do if the system overheats?
Check the front panel LEDs for alarm. Ensure ambient temperature is below 40°C. Clean air filters and verify fans are spinning. Replace faulty fans if needed.
User questions about XCubeNAS Qsan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual XCubeNAS - Qsan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XCubeNAS by Qsan.