ERI712SA - Range hood ELECTROLUX - Free user manual and instructions
Find the device manual for free ERI712SA ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Electrolux |
| Model | ERI712SA |
| Installation Type | Built-in / Under Cabinet |
| Width | 70 cm |
| Depth | 50 cm |
| Height | 30 cm |
| Weight | 10 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 200 W |
| Motor Type | Single Motor |
| Number of Speeds | 3 |
| Control Type | Push Button |
| Lighting | 2 x LED (5 W each) |
| Extraction Capacity | 620 m³/h |
| Noise Level (max) | 65 dB(A) |
| Grease Filter Type | Aluminum Mesh, Washable |
| Charcoal Filter | Optional, Replaceable |
| Exhaust Outlet Diameter | 120 mm |
| Energy Efficiency Class | B |
Frequently Asked Questions - ERI712SA ELECTROLUX
What is the recommended installation height for the ERI712SA range hood?
For optimal performance, install the hood 65-75 cm above the cooking surface for electric hobs and 75-85 cm for gas hobs.
How do I clean the grease filters?
Remove the aluminum mesh filters and wash them by hand or in the dishwasher using a mild detergent. Ensure they are completely dry before reinstalling.
Can the hood be used in recirculation mode?
Yes, the ERI712SA can be used in recirculation mode by installing an optional charcoal filter (model: AEG/Electrolux filter). The air is purified and returned to the kitchen.
How often should I replace the charcoal filter?
Replace the charcoal filter every 3 to 6 months depending on usage, or when the odor reduction performance decreases.
Why is the hood not extracting properly?
Check if the grease filters are clogged, ensure the ducting is not blocked, and verify that the hood is set to the appropriate speed level.
Does the hood have a remote control?
No, the ERI712SA is controlled via manual push buttons on the front panel.
What is the noise level at maximum speed?
The noise level reaches approximately 65 dB(A) at maximum speed, which is comparable to normal conversation.
Can I install the hood myself?
Installation should be performed by a qualified technician due to electrical connections and structural mounting requirements. Follow the instructions in the manual.
How do I reset the filter replacement indicator?
After replacing or cleaning the filters, press and hold the timer button (if present) for 5 seconds until the indicator light turns off. Refer to the manual for exact procedure.
What should I do if the hood stops working?
First, check the circuit breaker and power cord. If the issue persists, contact Electrolux customer support for troubleshooting or repair.
User questions about ERI712SA ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ERI712SA - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ERI712SA by ELECTROLUX.