SVJI603 - Dishwasher SVAN - Free user manual and instructions
Find the device manual for free SVJI603 SVAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | SVAN |
| Model | SVJI603 |
| Place Settings | 12 |
| Dimensions (H x W x D) | 85 x 45 x 57 cm |
| Weight | 38 kg |
| Noise Level | 49 dB(A) |
| Energy Efficiency Class | D |
| Annual Energy Consumption | 85 kWh |
| Water Consumption per Cycle | 9.5 L |
| Number of Programs | 6 (Eco, Intensive, Glass, Rapid, Normal, Pre-rinse) |
| Delayed Start | Yes (max 24 hours) |
| Drying System | Condensation drying with heat exchanger |
| Salt and Rinse Aid Indicators | Yes |
| Overflow Protection | Yes (AquaStop) |
| Child Lock | Yes |
| Interior Lighting | Yes (LED) |
| Cutlery Basket | Yes (third rack optional) |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Spare Parts Availability | 7 years |
| Warranty | 2 years |
Frequently Asked Questions - SVJI603 SVAN
How do I install the SVAN SVJI603 dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water inlet hose to a cold water supply (max 60°C). Connect the drain hose to a sink drain or waste pipe. Plug into a grounded electrical outlet. Adjust the feet for stability. Refer to the manual for detailed steps.
What do the error codes on the SVJI603 mean?
Common error codes: E1 - water intake issue, E2 - drainage problem, E4 - excessive water, E8 - heating element failure. If an error appears, turn off the appliance, check hoses and filters, then restart. If persists, contact service.
How do I clean the filters?
Remove the lower basket. Unscrew the filter cylinder (clockwise), lift out the flat filter. Rinse filters under running water, use a soft brush if needed. Reassemble: flat filter first, then cylinder, screw clockwise. Do not use abrasive cleaners.
How do I activate the child lock?
Press and hold the 'Start/Pause' button for 5 seconds until a beep sounds or a lock icon appears on the display. To deactivate, repeat the same step.
What detergent should I use?
Use dishwasher detergent in powder, gel, or tablet form. For best results, use tablets with integrated salt and rinse aid. Adjust dosage according to water hardness - set the water softener level per manual instructions.
Why is my dishwasher not draining?
Check if the drain hose is kinked or blocked. Clean the filter (see cleaning instructions). Ensure the sink drain is not clogged. If using an extended drain hose, confirm it's properly elevated. Run a quick rinse cycle to test.
How do I set the delayed start?
Press the 'Delay' button repeatedly to select a delay time (1 to 24 hours). The countdown starts when you press 'Start/Pause'. The dishwasher will begin after the set delay.
What should I do if dishes are not drying properly?
Ensure rinse aid is refilled. Use the 'Extra Dry' option if available. Open the door slightly after cycle for steam release. Avoid overloading. Check if the drying fan is working (if equipped).
Can I use ordinary salt instead of dishwasher salt?
No, use only specific dishwasher salt. Table salt or other salts can damage the water softener and may cause white residues on dishes. Refill salt through the dedicated cap in the bottom of the dishwasher.
Where can I find spare parts for the SVJI603?
Spare parts are available through authorized SVAN service centers or online spare parts retailers. Common parts: filters, spray arms, door seals, hoses. Provide model SVJI603 for accurate parts. SVAN ensures spare parts availability for at least 7 years.
User questions about SVJI603 SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SVJI603 - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SVJI603 by SVAN.
