LCD-2050 - Drill Ozito - Free user manual and instructions
Find the device manual for free LCD-2050 Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Ozito |
| Model | LCD-2050 |
| Power Supply | Corded electric, 230V~50Hz |
| Power Rating | 500 W |
| No‑Load Speed | 0–3000 RPM (variable with trigger) |
| Chuck Type | Keyless, 13 mm capacity |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 25 mm |
| Weight | 1.8 kg |
| Dimensions (LxWxH) | 260 x 65 x 200 mm |
| Main Functions | Drilling, screwdriving, hammer drilling (if equipped) |
| Variable Speed | Yes, controlled by trigger |
| Forward/Reverse | Yes |
| LED Work Light | Yes, integrated |
| Safety Features | Lock‑on button for continuous use, double insulation |
| Maintenance | Clean with dry cloth, check carbon brushes periodically |
| Spare Parts | Carbon brushes, chuck, power cord available from service centers |
| Accessories Included | 1 double‑ended screwdriver bit, 1 bit holder, carrying case |
| Warranty | 2 years |
Frequently Asked Questions - LCD-2050 Ozito
How do I change the drill speed?
The speed is variable by pressing the trigger harder or softer. For low speed (screwdriving), press lightly; for high speed (drilling), press fully.
Can I use this drill for hammer drilling?
Yes, the LCD-2050 features a hammer function selector. Rotate the selector to the hammer symbol for drilling into masonry or concrete.
How do I change the drill bit?
Rotate the chuck collar counter‑clockwise to open the jaws, insert the bit, then tighten clockwise securely by hand. No key required (keyless chuck).
What maintenance does the drill require?
Keep air vents clean and free of dust. Periodically inspect carbon brushes – replace when less than 6 mm long. Lubricate chuck jaws occasionally with light oil.
Why does the drill run but the bit doesn't spin?
The chuck may not be tightened properly. Ensure the bit is inserted fully and the chuck is tightened firmly. If the problem persists, the gearbox may need servicing.
Is the drill double insulated?
Yes, the drill is double insulated, meaning no earth wire is required. Always use with a suitable power outlet.
Can I use the drill for screwdriving?
Yes, set the variable speed to low and use the forward/reverse switch for driving or removing screws. Use the lock‑on button for continuous operation if needed.
What is the maximum drilling depth?
The drill can typically drill up to 13 mm in steel and 25 mm in wood. For larger diameters, use a spade bit at low speed.
How do I replace the carbon brushes?
Unscrew the brush cap covers on each side of the motor housing. Remove worn brushes and insert new ones (same type). Tighten caps and run the drill for a few minutes to seat brushes.
Where can I get spare parts?
Spare parts are available from Ozito service centers or authorized dealers. Check the Ozito website for a list of parts and service locations.
User questions about LCD-2050 Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual LCD-2050 - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LCD-2050 by Ozito.