UC-039K - Safe SentrySafe - Free user manual and instructions

Product Type	Safe
Brand	SentrySafe
Model	UC-039K
Color	Black / Gray
Exterior Dimensions (HxWxD)	13.2 x 10.2 x 10.2 in (33.5 x 25.9 x 25.9 cm)
Interior Dimensions (HxWxD)	12.5 x 9.5 x 9.5 in (31.8 x 24.1 x 24.1 cm)
Weight	15 lbs (6.8 kg)
Material	Heavy-gauge steel
Lock Type	Digital keypad with backup key
Number of Bolts	2 live-locking bolts
Fire Rating	1/2 hour at 1550°F (843°C)
Water Resistance	Protects against water damage (not submersible)
Power Source	4 AA batteries (not included)
Battery Life	Approximately 1 year
Mounting	Pre-drilled holes for floor mounting (hardware included)
Interior Organization	Removable shelf
Security Features	Pry-resistant hinge, solid steel construction, anti-drill plate
Maintenance	Wipe with damp cloth, avoid abrasives; replace batteries annually
Spare Parts	Replacement keys and battery compartment available
Warranty	Limited lifetime warranty

Frequently Asked Questions - UC-039K SentrySafe

How do I open the SentrySafe UC-039K if the batteries are dead?

Use the emergency override key. Insert the key into the lock located behind the keypad cover and turn to open.

What size batteries does the UC-039K require?

It requires 4 AA batteries (not included). Use high-quality alkaline batteries for best performance.

How do I change the battery?

Open the safe, remove the battery compartment cover inside the door, replace the 4 AA batteries, and close the cover.

Can I mount the safe to the floor?

Yes, the UC-039K has pre-drilled holes on the bottom. Use the included mounting hardware to secure it to a concrete or wooden floor.

What is the fire rating of the SentrySafe UC-039K?

It is UL classified to withstand 1/2 hour at 1550°F (843°C), protecting documents and valuables from fire.

Is the UC-039K waterproof?

It offers water resistance to protect against water damage from sprinklers or short-term submersion, but it is not fully waterproof.

What should I do if I forget my combination?

Use the backup key to open the safe. You can then reset the combination by following the instructions in the manual.

How do I reset the combination on the UC-039K?

Open the safe, press the reset button inside the door (usually with a pen), then enter a new 3-8 digit code followed by the '#' key.

Does the safe come with a warranty?

Yes, SentrySafe offers a limited lifetime warranty covering defects in material and workmanship. Keep your receipt.

How do I clean and maintain my safe?

Wipe the exterior and interior with a damp cloth using mild soap. Avoid abrasive cleaners. Check battery terminals for corrosion yearly.

USER MANUAL UC-039K SentrySafe

Thank you for purchasing this security safe from Sentry®Safe. This guide is designed to maximize the user and security features of this project.

1 Operating instructions

To open the safe:

1. Insert key labeled 'A' into bottom lock; turn counter-clockwise to 9 o'clock
2. Insert numerically labeled key into top lock; turn clockwise to 5 o'clock
3. Slowly pull door towards you

Replacement keys

To order replacement keys and/or combinations, we must have the correct model and serial number of your safe. Find your safe's Serial Number on the small label located on the outside of your safe and on the original owner's manual. Once you locate this information, please visit www.sentrysafe.com or call customer service at 1-800-828-1438.

2 Bolt-down instructions

This kit contains:

• Four (4) Masonry Anchors

Required tools:

• Powered Drill
• Adjustable Wrench
  • 1/2 in. (M12) Masonry Drill
• Safety Glasses

Instructions:

1. Unlock safe and open door.
2. Remove safe floor carpet.
3. Look on the bottom of safe for four (4) holes with cap plugs.
4. Remove the cap plugs.

5. Position the safe in the desired location.

6. From inside the safe mark the location of the four (4) bolt down holes.

7. Move the safe aside to the clear marked spots for drilling.
8. Using the 12 in. masonry drill, drill a 4 in. deep hole in the marked locations.
9. Replace the safe in the desired location with the holes in the safe aligned with the drilled holes in the floor.
10. Pass each masonry anchor through the safe floor into the drilled holes; making contact with the safe floor.
11. Tighten each masonry anchor with the adjustable wrench.
12. Replace safe floor carpet.

Coffre-fort à Fente