POULAN

Pro PP428C - Lawn mower POULAN - Free user manual and instructions

Find the device manual for free Pro PP428C POULAN in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeRiding lawn mower
BrandPoulan
ModelPro PP428C
Dimensions (L x W x H)170 x 140 x 105 cm
Weight175 kg
Engine4-stroke petrol, 500 cm³
Engine power12.5 kW (17 hp)
Cutting systemRotary blades
Cutting width107 cm (42 inches)
Cutting height25 to 100 mm (adjustable)
TransmissionHydrostatic
Forward speed0 - 8 km/h
Reverse speed0 - 4 km/h
Fuel tank6 L
Engine oil capacity1.5 L
Starting systemElectric (key)
Battery12 V, 20 Ah
SafetyPresence switch, parking brake
Regular maintenanceOil check, air filter, spark plug
CleaningClean the underside of the deck after each use
Spare partsBlades, filters, spark plugs, belts available
RepairabilitySpare parts manual available

Frequently Asked Questions - Pro PP428C POULAN

How to adjust the cutting height on the Poulan Pro PP428C?
Use the adjustment lever near the seat to adjust the cutting height between 25 and 100 mm. Turn the lever in the desired direction until the preferred position.
What type of engine oil to use?
Use SAE 30 oil (or 10W-30 in cold weather) with quality API SJ or higher. Capacity is approximately 1.5 liters.
How to start the mower?
Ensure the parking brake is engaged, the blade is disengaged, then insert the key and turn it to the start position. Release the key as soon as the engine starts.
What to do if the mower does not start?
Check the fuel level, spark plug condition, air filter, and battery. Ensure the blade is disengaged and the parking brake is engaged.
How to maintain the blades?
Disconnect the spark plug, then lift the mower. Remove the blades, sharpen or replace them if necessary. Tighten the bolts to the recommended torque (about 50 Nm).
When to change the engine oil?
Change the oil after the first 5 hours of use, then every 50 hours or at the beginning of each season.
How to clean the cutting deck?
Use a garden hose with an integrated cleaning adapter if available. Tilt the mower on its side (spark plug up) and rinse with water.
The hydrostatic transmission slips, what to do?
Check the transmission oil level. If the problem persists, consult a professional as it may be internal wear.
Where to buy spare parts?
Parts are available from authorized Poulan dealers or online. Use the model number (PP428C) to identify compatible parts.
How to adjust the carburetor?
The carburetor is adjusted at the factory. If necessary, adjust the idle and mixture screws with a screwdriver. Consult the manual for specific adjustments.

User questions about Pro PP428C POULAN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lawn mower in PDF format for free! Find your manual Pro PP428C - POULAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro PP428C by POULAN.

USER MANUAL Pro PP428C POULAN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : POULAN

Model : Pro PP428C

Category : Lawn mower