C2SBA+II - Motherboard Supermicro - Free user manual and instructions
Find the device manual for free C2SBA+II Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard for server/workstation |
| Brand | Supermicro |
| Model | C2SBA+II |
| Form Factor | ATX (12" x 9.6") |
| CPU Socket | LGA775 |
| Supported CPUs | Intel Xeon 3000/3200, Core 2 Duo/Quad, Celeron |
| Chipset | Intel 3210 + ICH9R |
| Memory Type | DDR2 ECC/non-ECC unbuffered 667/800 MHz |
| Maximum Memory | 8 GB (4 DIMM slots) |
| Expansion Slots | 1 x PCI-E x16, 1 x PCI-E x4, 1 x PCI-E x1, 2 x PCI 32-bit |
| Storage Interfaces | 6 x SATA II (3 Gb/s) via ICH9R, 2 x eSATA |
| RAID Support | RAID 0, 1, 5, 10 (Intel Matrix Storage) |
| LAN | 2 x Gigabit Ethernet (Intel 82573) |
| Audio | Realtek ALC888 7.1-channel HD Audio |
| USB Ports | 4 x USB 2.0 rear, 2 x USB 2.0 header |
| Power Connectors | 24-pin ATX, 8-pin EPS 12V |
| Weight | Approximately 1.5 lbs (0.68 kg) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Cleaning | Use compressed air; avoid liquids |
| Safety Precautions | Handle with ESD wrist strap; power off before installation |
| Spare Parts | Available from Supermicro or authorized dealers (e.g., I/O shield, cables) |
| Repairability | Moderate; standard components replaceable (e.g., CPU, RAM, CMOS battery) |
Frequently Asked Questions - C2SBA+II Supermicro
What CPUs are supported by the Supermicro C2SBA+II?
The C2SBA+II supports Intel Xeon 3000/3200 series, Core 2 Duo/Quad, and Celeron processors in LGA775 socket.
What type of memory does this motherboard use?
It uses DDR2 ECC or non-ECC unbuffered memory at speeds of 667 or 800 MHz, with a maximum capacity of 8 GB across four DIMM slots.
Does the C2SBA+II support RAID?
Yes, it supports RAID 0, 1, 5, and 10 via the Intel ICH9R controller (Intel Matrix Storage Technology).
How can I update the BIOS on this motherboard?
Download the latest BIOS from Supermicro's website, then use the built-in Flash Utility (SUPERO BIOS Flash) via USB or DOS bootable media.
What form factor is the C2SBA+II?
It is a standard ATX motherboard measuring 12 inches by 9.6 inches.
Does this motherboard have onboard graphics?
No, it relies on a discrete graphics card installed in the PCI-E x16 slot for video output.
What power supply do I need?
A standard ATX power supply with a 24-pin main connector and an 8-pin EPS 12V CPU power connector is required. Recommended wattage depends on installed components, typically 500W or more.
How do I clear the CMOS?
Power off and unplug the system, remove the CMOS battery for 30 seconds, or use the clear CMOS jumper (JBT1) on the motherboard.
Where can I find drivers for the C2SBA+II?
Drivers are available on Supermicro's support page. Key drivers include Intel Chipset, LAN, Audio, and RAID drivers for your operating system.
What is the maximum operating temperature?
The motherboard is specified to operate between 0°C and 45°C (32°F to 113°F). Ensure adequate airflow in your chassis.
User questions about C2SBA+II Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual C2SBA+II - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C2SBA+II by Supermicro.