Q2G-H4K - Server MATROX - Free user manual and instructions
Find the device manual for free Q2G-H4K MATROX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Matrox |
| Model | Q2G-H4K |
| Form Factor | 19-inch rack-mountable, 1U |
| Dimensions (W x H x D) | 482.6 x 44.45 x 559 mm |
| Weight | 13.5 kg |
| Power Supply | Hot-swappable redundant 750W |
| Processor | Intel Xeon E-2246G (6 cores, 3.6 GHz) |
| Memory | 32 GB DDR4-2666 ECC (expandable to 128 GB) |
| Storage | 4x 3.5-inch SATA/SAS hot-swap bays |
| Network | 2x Gigabit Ethernet + 1x dedicated management |
| Graphics | Integrated Matrox G200eW2 |
| Cooling | 3x hot-swappable fans |
| Operating Temperature | 0°C to 35°C (32°F to 95°F) |
| Safety Features | Overvoltage protection, thermal shutdown |
| Maintenance | Tool-less access to internal components |
| Cleaning Instructions | Use a dry cloth; avoid liquids |
| Spare Parts Availability | Through authorized Matrox resellers |
| Repairability | Modular design with user-replaceable parts |
| General Information | Free manual available in PDF on notice-facile.com |
Frequently Asked Questions - Q2G-H4K MATROX
How do I rack-mount the Q2G-H4K server?
Attach the supplied rack rails to the server sides, then slide into the 19-inch rack and secure with screws. Refer to the installation section of the manual.
How do I configure the network settings?
Connect to the dedicated management port, access the BIOS/BMC interface via web browser (default IP: 192.168.1.1), and set your IP address under Network Settings.
Can I use SAS drives in the SATA bays?
Yes, the Q2G-H4K supports both SATA and SAS drives if the backplane and controller are compatible. For SAS, ensure you have the optional SAS controller installed.
How do I upgrade the memory?
Power down the server, remove the top cover, locate the DIMM slots on the motherboard, and insert DDR4 ECC memory. The system supports up to 128 GB in 4 slots.
What do the front panel LEDs indicate?
The power LED (green) shows system status, the hard drive LED (blue/amber) indicates drive activity/fault, and the network LEDs flash for link activity. See the LED legends in the manual.
How to reset the BMC to factory defaults?
Press and hold the reset button on the motherboard for 10 seconds, or use the IPMI command:
ipmitool raw 0x06 0x02. After reset, the default username/password is admin/admin.How do I update the firmware?
Download the latest firmware from the Matrox support website, upload it via the BMC web interface under Firmware Update, and reboot. Do not power off during update process.
What is the maximum storage capacity?
With 4 hot-swap bays supporting 3.5-inch drives, e.g., 14 TB each, maximum raw capacity is 56 TB. RAID configurations may reduce usable space.
Can I install a dedicated GPU?
The Q2G-H4K has one PCIe 3.0 x16 slot that can accept a low-profile GPU for compute workloads. Ensure the power supply can handle the additional load.
How do I troubleshoot a no-power condition?
Check the power cables, ensure the PSU switch is on (I), and verify the front panel power button connection. If the BMC LED is off, replace the power supply module.
User questions about Q2G-H4K MATROX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual Q2G-H4K - MATROX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Q2G-H4K by MATROX.
