HGD595120Q - Heating BOSCH - Free user manual and instructions

Product Type	Wall-mounted heater
Brand	Bosch
Model	HGD595120Q
Energy Source	Electric
Voltage	220-240 V ~ 50/60 Hz
Power Output	2000 W
Heating Type	Convection and fan-assisted
Dimensions (H x W x D)	600 x 400 x 150 mm
Weight	5.5 kg
Mounting	Wall fixing (brackets included)
Controls	Electronic with thermostat and timer
Safety Features	Overheat protection, tip-over switch, child lock
Noise Level	< 45 dB
Heat Settings	2 levels (1000 W / 2000 W) plus eco mode
Cleaning	Wipe with damp cloth; do not use abrasive cleaners
Filter	Washable dust filter
Spare Parts	Available from Bosch service centers
Certifications	CE, GS

Frequently Asked Questions - HGD595120Q BOSCH

How do I install the Bosch HGD595120Q heater on the wall?

Use the included wall fixing brackets. Drill holes at the marked positions, insert wall plugs, and screw the brackets. Hang the heater and secure it. Ensure the wall can support the weight (5.5 kg).

What is the maximum room size this heater can warm?

With 2000 W output, it is suitable for rooms up to 20 m² (with standard insulation). Use higher setting for larger spaces.

Can I use an extension cord with this heater?

No, it must be plugged directly into a wall socket. Using an extension cord or multi-socket adapter can cause overheating and fire.

How do I clean the heater?

Always unplug first. Wipe the exterior with a soft damp cloth. The filter can be removed and washed under running water; let it dry fully before reinserting.

What does the child lock do?

The child lock disables the control panel to prevent accidental setting changes. Activate it by pressing and holding the lock button for 3 seconds.

Why does the heater turn off automatically?

It has overheat protection and a tip-over switch. If the temperature exceeds safe limits or the unit tilts, it will shut off. Reset by unplugging for 5 minutes.

How do I set the timer?

Press the timer button and set the desired hours (1-24) using +/-. The heater will run for that duration and then switch to standby.

Is the heater suitable for bathrooms?

It has IP21 rating (drip-proof), but should not be installed within reach of water sources. Place at least 1 meter from shower or bath.

What do the error codes mean?

E1: sensor issue; E2: overheat; E3: communication error. If persistent, contact Bosch service. Refer to manual for full list.

Where can I find spare parts?

Spare parts (filter, brackets, etc.) are available from Bosch authorized service centers or online shop.bosch.com. Use model HGD595120Q for reference.

USER MANUAL HGD595120Q BOSCH

de Wandbefestigung
bg Закрепване за стена
cs Připevnění ke stěně
da Vægbefæstigelse
el Στερέωση στον τοίχο
en Wall fixing
es Fijación a la pared
et Seinakinnitus
fi Seinäkiinnitys
fr Fixation murale
hr Pričvršćenje na zidu

hu Falon történő rögzítés
it Fissaggio alla parete
kk Кабырғаға бекіту
It Tvirtinimas prie sienos
Iv Stiprināšana pie sienas
mk Зацврстување на сид
nl Bevestiging aan de wand
no Veggfeste
pl Mocowanie do ściany
pt Fixação à parede
ro Fixarea de perete

ru Крепление к стене
sk Upevnenie k stene
sl Stenska pritrditev
sq Përforcimi në mur
sr Fiksator za zid
sv Tippskydd
tr Duvar tespiti
uk Кріплення до стіни

az Divara bərkitmə

ka 3000000000000000000000