XM-M92-4P-UA - Uncategorized Digi - Free user manual and instructions
Find the device manual for free XM-M92-4P-UA Digi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Cellular Router |
| Model | XM-M92-4P-UA |
| Brand | Digi |
| Dimensions | 120 x 100 x 30 mm |
| Weight | 350 g |
| Power Input | 9-30 VDC |
| Power Consumption | 6 W typical |
| Cellular Interface | 4G LTE Cat 4 |
| Ethernet Ports | 4 x RJ45 (10/100 Mbps) |
| Serial Port | RS-232/422/485 (DB9) |
| SIM Slot | 1 x Mini SIM (2FF) |
| Antenna Connectors | 2 x SMA (main + diversity) |
| LED Indicators | Power, Status, Signal, Ethernet |
| Operating Temperature | -20°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 0-95% non-condensing |
| Certifications | FCC, CE, IC |
| Mounting | DIN rail or wall mount |
| Protection Class | IP30 |
| Software Features | VPN, firewall, NAT, DHCP |
| Management | Web GUI, CLI, SNMP |
Frequently Asked Questions - XM-M92-4P-UA Digi
How do I factory reset the Digi XM-M92-4P-UA?
Press and hold the Reset button (located near the SIM slot) for at least 10 seconds until the Status LED blinks rapidly. Release the button; the device will reboot to factory defaults.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. Default username is admin and password is admin (case-sensitive). Access via a web browser connected to one of the LAN ports.
How do I insert a SIM card?
Remove the SIM cover on the side panel. Insert the Mini SIM (2FF) with the gold contacts facing down and the cut corner oriented as indicated. Push until it clicks, then replace the cover.
What type of antenna does the device use?
The device uses SMA male connectors. The main antenna is required; the diversity antenna is optional but recommended for better signal. Use antennas with appropriate cellular frequency bands.
How can I update the firmware?
Download the latest firmware from Digi’s support site. Access the web GUI, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Why is the cellular LED not turning on?
Check that the SIM card is properly inserted and activated. Verify that the antenna is connected. Ensure the device is in an area with cellular coverage. The LED should be solid green when registered on the network.
Can I use the device with a VPN?
Yes, the device supports VPN protocols including IPsec, OpenVPN, and PPTP. Configure them under the VPN section in the web GUI or via CLI.
What are the power supply requirements?
The device accepts 9-30 VDC input. It can be powered via the terminal block or a compatible power adapter (not included). Wire polarity: positive to +, negative to -.
How do I enable remote management?
Navigate to Configuration > Remote Access. Enable HTTP/HTTPS or SSH access from WAN, and set a strong password. For security, restrict access by IP address and use HTTPS.
What should I do if the device becomes unresponsive?
Perform a power cycle by disconnecting power for 30 seconds. If still unresponsive, perform a factory reset as described. If issues persist, contact Digi technical support.
User questions about XM-M92-4P-UA Digi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual XM-M92-4P-UA - Digi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XM-M92-4P-UA by Digi.