N-580 - Network card / adapter ST Lab - Free user manual and instructions
Find the device manual for free N-580 ST Lab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Adapter |
| Model | N-580 |
| Brand | ST Lab |
| Interface | PCI Express (PCIe) |
| Port Type | RJ-45 Ethernet |
| Data Rate | 10/100/1000 Mbps (Gigabit Ethernet) |
| Supported Standards | IEEE 802.3, 802.3u, 802.3ab |
| Dimensions | 120 mm × 80 mm × 20 mm |
| Weight | 50 g |
| Power Consumption | 2.5 W (max) |
| Operating Voltage | 3.3V / 5V (via PCIe slot) |
| Operating System Support | Windows 10/11, Linux Kernel 4.0+ |
| LED Indicators | Link/Activity, Speed |
| Maintenance | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety Precautions | Discharge static electricity before handling. Avoid exposure to moisture. |
| Spare Parts | No user-serviceable parts. Integrated circuit. |
| Repairability | Not repairable; replace the entire adapter if defective. |
| Package Contents | Network card, low-profile bracket, driver CD (optional), user manual |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - N-580 ST Lab
How do I install the ST Lab N-580 network card?
Turn off your computer, unplug it, and open the case. Insert the card into an available PCIe slot, secure it with the screw, close the case, and boot up. Install the drivers from the included CD or download them from the manufacturer's website.
Is the N-580 compatible with Windows 11?
Yes, the ST Lab N-580 supports Windows 10/11. Drivers are available on the official site if not automatically detected.
What should I do if my computer does not recognize the network card?
First, ensure the card is fully seated in the PCIe slot. Check Device Manager for unknown devices. Install the latest drivers manually. If the issue persists, try a different PCIe slot or test the card on another computer.
Does the N-580 support Wake-on-LAN?
Yes, Wake-on-LAN (WoL) is supported. Enable it in the adapter's properties under the Power Management tab in Device Manager.
What network speeds does the N-580 support?
The N-580 supports 10/100/1000 Mbps (Gigabit Ethernet) and is backward compatible with slower networks.
Can I use the N-580 in a low-profile case?
Yes, the package includes a low-profile bracket. Replace the standard bracket with the low-profile one before installation.
What is the power consumption of the N-580?
The maximum power consumption is approximately 2.5 watts, drawn from the PCIe slot.
Does the N-580 support jumbo frames?
Yes, jumbo frames up to 9 KB are supported. Configure them in the adapter's advanced settings.
Is the N-580 compatible with Linux?
Yes, it is supported under Linux Kernel 4.0 and later. Most distributions automatically load the required driver.
Why is the link LED not lighting up?
Ensure the Ethernet cable is securely connected to both the card and the router/switch. Try a different cable or port. Check if the network device is powered on. If the LED remains off, the card may be faulty.
User questions about N-580 ST Lab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual N-580 - ST Lab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N-580 by ST Lab.