HLG0314-V2.0 - Extendeur AV HELGI - Free user manual and instructions
Find the device manual for free HLG0314-V2.0 HELGI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Extender |
| Brand | HELGI |
| Model | HLG0314-V2.0 |
| Input Interface | HDMI (Type A Female) |
| Output Interface | HDMI (Type A Female) via RJ45 (Cat5e/6) |
| Max Resolution | 1920x1080 @ 60Hz (Full HD) |
| Transmission Range | Up to 50 meters over Cat6 cable |
| Power Supply | DC 5V/1A via USB Micro-B or included adapter |
| Power Consumption | 2.5W (max) |
| Dimensions (LxWxH) | 85 x 55 x 20 mm |
| Weight | 80 g (each unit) |
| Supported Audio | PCM 2.0 channel, multi-channel up to 5.1 |
| HDCP Support | Yes, HDCP 1.4 |
| EDID Bypass | Automatic |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 85% (non-condensing) |
| Cable Requirements | Cat5e/6 UTP or STP, up to 50m |
| LED Indicators | Power and Link status |
| Housing Material | ABS plastic |
| Certifications | CE, RoHS |
| Package Contents | 1x Transmitter, 1x Receiver, 2x Power Adapters, 1x User Manual |
| Care and Cleaning | Wipe with a dry soft cloth. Do not use liquids or solvents. |
| Safety Precautions | Keep away from water, heat sources, and magnetic fields. Do not disassemble. |
| Spare Parts and Repairability | No user-serviceable parts. Contact HELGI support for repairs. |
Frequently Asked Questions - HLG0314-V2.0 HELGI
What is the maximum resolution supported by the HLG0314-V2.0 AV extender?
The extender supports Full HD 1080p at 60Hz. For higher resolutions like 4K, please check the product specifications.
How do I connect the extender?
Connect the transmitter to your source device (e.g., DVD player) via HDMI, and the receiver to your display. Then, connect both units using a Cat5e/6 cable up to 50 meters. Finally, power each unit via the provided USB adapter.
Do I need any special cables?
Yes, you need two HDMI cables (between source and transmitter, and between receiver and display) and one Ethernet cable (Cat5e or Cat6) for the extension.
Why is there no picture on my screen?
Check that all cables are securely connected, both units are powered on, and the Ethernet cable length does not exceed 50 meters. Also ensure the source and display are set to the correct input. Try resetting both units by unplugging power for 10 seconds.
Does the extender support HDCP?
Yes, it supports HDCP 1.4, so it works with most Blu-ray players, streaming devices, and gaming consoles.
Can I extend audio only?
The extender transmits both video and audio over the same cable. It cannot separate audio only without a video signal.
What is the power consumption?
Each unit consumes approximately 2.5W, making it very energy-efficient.
Is the extender plug-and-play?
Yes, it is plug-and-play. No drivers or software installation is required.
How can I clean the extender?
Use a dry, soft cloth to wipe the surface. Do not use any liquids, solvents, or abrasive cleaners.
Where can I find spare parts or get repairs?
This device has no user-serviceable parts. For repairs or spare parts, please contact HELGI customer support.
User questions about HLG0314-V2.0 HELGI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Extendeur AV in PDF format for free! Find your manual HLG0314-V2.0 - HELGI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HLG0314-V2.0 by HELGI.