AMP300 - Receiver OSD Audio - Free user manual and instructions
Find the device manual for free AMP300 OSD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | OSD Audio |
| Model | AMP300 |
| Power Output | 2 x 150W RMS at 8 ohms |
| Frequency Response | 20 Hz – 20 kHz ±1 dB |
| Input Impedance | 10 k ohms |
| Signal-to-Noise Ratio | >80 dB |
| Total Harmonic Distortion | <0.1% |
| Audio Inputs | 2x RCA, 1x Optical, 1x Coaxial |
| Audio Outputs | Speaker terminals, RCA Pre-out |
| Dimensions (W x D x H) | 17 x 12 x 3 inches (432 x 305 x 76 mm) |
| Weight | 15 lbs (6.8 kg) |
| Power Supply | AC 120V, 60Hz |
| Supported Speaker Impedance | 4 – 16 ohms |
| Remote Control | Included |
| Bass/Treble Control | Yes |
| Maintenance | Wipe with a soft, dry cloth. Do not use liquids or chemicals. |
| Safety | Disconnect power before cleaning. Keep ventilation openings uncovered. |
| Spare Parts & Repair | Contact OSD Audio customer support or an authorized service center. |
| Warranty | See included warranty card or visit OSD Audio website. |
Frequently Asked Questions - AMP300 OSD Audio
What is the power output of the OSD Audio AMP300 receiver?
The AMP300 delivers 2 x 150 watts RMS at 8 ohms, providing ample power for most home audio systems.
What audio inputs does the AMP300 have?
It includes two RCA inputs, one optical input, and one coaxial input for connecting various sources.
Can I use the AMP300 with 4-ohm speakers?
Yes, it supports speaker impedances from 4 to 16 ohms, though power output may vary.
Does the AMP300 come with a remote control?
Yes, a remote control is included for convenient volume and source selection.
How do I clean and maintain the AMP300?
Use a soft, dry cloth to wipe the exterior. Avoid liquids and chemicals. Ensure the unit is unplugged during cleaning.
What are the dimensions and weight of the AMP300?
It measures 17 x 12 x 3 inches (432 x 305 x 76 mm) and weighs approximately 15 lbs (6.8 kg).
Is there a warranty for the OSD Audio AMP300?
Warranty details are provided with the product. Visit the OSD Audio website or contact customer support for specific terms.
Can I connect a subwoofer to the AMP300?
Yes, it has a RCA pre-out for connecting a powered subwoofer.
What should I do if the AMP300 overheats?
Ensure adequate ventilation around the unit. Do not block the cooling vents. If overheating persists, turn off and contact support.
Is the AMP300 compatible with a 220V power supply?
The standard model is designed for 120V AC, 60Hz. For 220V operation, check with OSD Audio for a compatible version or use a voltage converter.
User questions about AMP300 OSD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AMP300 - OSD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMP300 by OSD Audio.