SmartNode 4980 - IP Telephony Patton - Free user manual and instructions
Find the device manual for free SmartNode 4980 Patton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Telephony Gateway |
| Model | SmartNode 4980 |
| Brand | Patton |
| Form Factor | 1U Rackmount |
| Dimensions (WxDxH) | 43.2 x 31.5 x 4.4 cm (17 x 12.4 x 1.75 in) |
| Weight | 3.6 kg (7.9 lbs) |
| Power Supply | 100-240 VAC, 50-60 Hz, external adapter |
| Power Consumption | 30W typical |
| Voice Interfaces | 4 FXS, 4 FXO ports |
| Network Interfaces | 2 x 10/100/1000 Ethernet (RJ-45) |
| Protocol Support | SIP, RTP, RTCP, T.38 Fax |
| Codec Support | G.711, G.722, G.729, GSM |
| Management | Web GUI, CLI, SNMP, SSH |
| Security | TLS, SRTP, HTTPS, firewall |
| Maintenance | Firmware upgrade via web; factory reset button |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Spare Parts | Power adapter, mounting brackets, RJ-45 cables |
| Repairability | Modular components; replaceable power supply |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - SmartNode 4980 Patton
How do I reset the SmartNode 4980 to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until the LEDs flash. The device will reboot with default settings.
What is the default IP address and login credentials?
The default LAN IP is 192.168.1.1. Username: admin, Password: admin. Change immediately after first login.
How do I configure SIP trunks?
Go to Voice -> SIP in the web interface. Add a new SIP trunk with the provider's server address, port, and authentication credentials. Apply and save.
Can I use the SmartNode 4980 with analog phones?
Yes, the FXS ports connect directly to standard analog telephones. Configure the extension settings under Voice -> Subscribers.
How to update the firmware?
Download the latest firmware from Patton's support site. In the web GUI, go to Administration -> Firmware Upgrade, upload the file, and reboot.
What should I do if I cannot access the web interface?
Ensure your PC is on the same subnet (e.g., 192.168.1.x). Check the LAN cable. If still inaccessible, try a factory reset using the hardware button.
How do I enable T.38 fax support?
Navigate to Voice -> Advanced -> Fax and enable T.38. Set the appropriate bit rate (e.g., 14400 bps). Save and apply.
Can this gateway connect to a PRI line?
The SmartNode 4980 does not have PRI ports. It only supports analog FXS/FXO. For PRI, consider the Patton SmartNode 4630 series.
How to secure the device from unauthorized access?
Use HTTPS for management, restrict IP access via firewall, disable remote access if not needed, and change default passwords.
What does the blinking red power LED indicate?
A blinking red power LED typically indicates a hardware fault or insufficient power. Check the power adapter and connections. If persists, contact Patton support.
User questions about SmartNode 4980 Patton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your IP Telephony in PDF format for free! Find your manual SmartNode 4980 - Patton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartNode 4980 by Patton.