DataBlast YX550-ALTE-AWS - TV signal amplifier zBoost - Free user manual and instructions
Find the device manual for free DataBlast YX550-ALTE-AWS zBoost in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TV Signal Amplifier |
| Brand | zBoost |
| Model | DataBlast YX550-ALTE-AWS |
| Dimensions (approx.) | 200 mm × 150 mm × 50 mm |
| Weight (approx.) | 1.0 kg |
| Power Supply | 12V DC, 2A adapter included |
| Frequency Support | VHF (174-230 MHz) and UHF (470-862 MHz) |
| Gain | 30 dB typical |
| Input/Output Impedance | 75 Ω |
| Number of Outputs | 1 (TV set or distribution) |
| Primary Function | Boosts weak TV signals for clearer reception |
| Installation | Indoor, near antenna cable |
| Indicator Lights | Power LED, Signal strength LED (if applicable) |
| Maintenance | Wipe with a soft, dry cloth; avoid liquids |
| Safety | Do not expose to moisture; use only supplied power adapter |
| Spare Parts & Reparability | Contact zBoost support for replacement adapter or unit |
| Operating Temperature | 0 °C to 40 °C |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - DataBlast YX550-ALTE-AWS zBoost
How do I install the zBoost DataBlast YX550-ALTE-AWS?
Connect the antenna cable to the amplifier's input. Then connect the amplifier's output to your TV using a coaxial cable. Plug the power adapter into a wall outlet. The amplifier will automatically boost the signal.
Does this amplifier work with digital TV signals?
Yes, it works with both analog and digital TV signals (DVB-T/T2). It amplifies signals in the VHF and UHF bands.
Can I use this amplifier with multiple TVs?
The amplifier has a single output. To connect multiple TVs, you need an additional splitter. The splitter may reduce signal strength, so choose a low-loss model.
What is the maximum signal boost?
The amplifier provides up to 30 dB gain, which is sufficient for weak signal areas. However, excessive gain can cause overloading.
Why is the power LED not turning on?
Check that the power adapter is securely connected to the amplifier and to a working power outlet. If the LED still does not light, try a different outlet or contact support.
How do I clean the amplifier?
Unplug the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use water or cleaning solvents.
Can I mount this amplifier outdoors?
No, this amplifier is designed for indoor use only. Keep it away from moisture and extreme temperatures.
Does the amplifier need grounding?
For safety, if the antenna system is outdoors, proper grounding of the mast and cable is recommended. The amplifier itself does not require additional grounding.
What should I do if the picture quality does not improve?
Ensure all connections are tight and the antenna is properly positioned. The amplifier only boosts existing signals; if the signal is very weak or blocked, a better antenna may be needed.
Is the power adapter universal?
The supplied adapter outputs 12V DC, 2A. Only use the provided adapter to avoid damage. If lost, contact zBoost for a replacement.
User questions about DataBlast YX550-ALTE-AWS zBoost
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV signal amplifier in PDF format for free! Find your manual DataBlast YX550-ALTE-AWS - zBoost and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DataBlast YX550-ALTE-AWS by zBoost.