Lexima LX 107 - Fishing reel Banax - Free user manual and instructions
Find the device manual for free Lexima LX 107 Banax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Spinning Fishing Reel |
| Brand | Banax |
| Model | Lexima LX 107 |
| Weight | Approx. 250 g |
| Gear Ratio | 5.2:1 |
| Ball Bearings | 5+1 |
| Line Capacity (mm/m) | 0.25mm/200m |
| Drag System | Front drag, max 8 kg |
| Spool Material | Machined aluminum |
| Body Material | Graphite composite |
| Handle | Folding, double handle |
| Anti-Reverse | Instant anti-reverse bearing |
| Function | Smooth casting and retrieve |
| Maintenance | Rinse with fresh water after saltwater use; lubricate annually |
| Safety | Keep away from children; do not exceed max drag |
| Spare Parts | Spare spools, handles, and drag washers available |
| Repairability | Serviceable by authorized dealers |
| General Information | Suitable for freshwater and light saltwater fishing |
Frequently Asked Questions - Lexima LX 107 Banax
How do I spool the Banax Lexima LX 107 reel with new fishing line?
Open the bail arm, thread the line through the roller, tie it to the spool, close the bail, and wind the line onto the spool under moderate tension. Use a line spooler or ask a friend to hold the spool for even distribution.
What type of drag system does the Lexima LX 107 use?
It uses a front drag system with a maximum drag of approximately 8 kg, adjustable via the star wheel on top of the spool.
How many ball bearings are in the Banax Lexima LX 107?
The reel features 5+1 ball bearings for smooth operation, including an anti-reverse bearing.
How should I clean and maintain my fishing reel?
After each use, especially in saltwater, rinse the reel with fresh water. Periodically apply a drop of lubricating oil to the bail roller and handle pivot. Annually, disassemble and clean internal parts with a mild solvent, then re-grease gears.
What line capacity does the Lexima LX 107 have?
Typical line capacity is 0.25mm diameter / 200 meters. For braided line, capacity may vary; consult the reel's side plate markings.
Is the Banax Lexima LX 107 suitable for saltwater fishing?
It is suitable for light saltwater use, but thorough freshwater rinsing after each trip is essential to prevent corrosion. For heavy saltwater fishing, a sealed reel is recommended.
How do I adjust the drag on my reel?
Turn the front drag star wheel clockwise to tighten (increase drag) and counterclockwise to loosen. Adjust while line is under tension to achieve desired resistance.
What is the gear ratio of the Lexima LX 107?
The gear ratio is 5.2:1, meaning one handle turn yields 5.2 spool rotations, providing a moderate retrieve speed.
Where can I find replacement parts for my Banax reel?
Replacement parts such as spools, handles, and drag washers can be ordered from authorized Banax dealers or online fishing tackle retailers. Contact Banax customer support for assistance.
How do I fix a slipping drag on the Lexima LX 107?
First, ensure the drag star is tightened. If still slipping, open the spool and inspect the drag washers for wear or contamination. Clean or replace the washers, and apply a thin layer of drag grease before reassembling.
User questions about Lexima LX 107 Banax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fishing reel in PDF format for free! Find your manual Lexima LX 107 - Banax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lexima LX 107 by Banax.