Glamour - Parquet stratifié Kronotex - Free user manual and instructions

Product Type	Laminate Flooring
Brand	Kronotex
Model	Glamour
Plank Dimensions (L x W x T)	1285 x 192 x 8 mm
Thickness	8 mm
AC Rating	AC4 (Class 32) - Suitable for residential and light commercial use
Locking System	Click system (Floating installation)
Surface Texture	Embossed wood grain
Edge Type	4-sided V-groove
Installation Method	Floating (no glue required)
Underfloor Heating	Suitable (max surface temperature 27°C)
Moisture Resistance	Water-resistant HDF core, recommended for dry areas
Wear Layer Thickness	0.3 mm
Warranty	10 years residential (conditions apply)
Package Coverage	Approximately 2.1 m² per pack (9 planks)
Weight per Pack	~15 kg
Emission Class	E1 (low formaldehyde)
Certifications	PEFC, CE
Recommended Cleaning	Damp mop with mild cleaner, avoid steam cleaners
Maintenance	Use protective pads under furniture, sweep regularly

Frequently Asked Questions - Glamour Kronotex

How to install Kronotex Glamour laminate flooring?

The Glamour range uses a click locking system for floating installation. Ensure the subfloor is clean, dry, and level. Leave an expansion gap of 10-12 mm around walls. Install underlayment, then click planks together at an angle and snap down.

Can this flooring be used with underfloor heating?

Yes, Kronotex Glamour is suitable for underfloor heating systems with a maximum surface temperature of 27°C. Use a suitable underlay and follow the heating manufacturer's guidelines.

How do I clean and maintain the laminate floor?

Regularly sweep or vacuum with a soft brush. For mopping, use a damp (not wet) mop with a pH-neutral laminate cleaner. Avoid steam cleaners, abrasive cleaners, and excessive water.

What is the AC rating of this laminate?

The Glamour model has an AC4 rating (Class 32), making it suitable for heavy residential and light commercial use.

Can I repair a damaged plank?

Yes, individual planks can be replaced. Cut the damaged plank lengthwise and remove pieces. Install a new plank using glue on the tongue and groove, then use a tapping block to secure.

Does the flooring come with a warranty?

Kronotex offers a 10-year residential warranty covering manufacturing defects. Commercial use may have different terms. Retain the purchase receipt.

What underlay should I use?

A foam underlay with a vapor barrier is recommended. For underfloor heating, use a specialized underlay with low thermal resistance. Ensure the underlay is compatible with floating floors.

Is the flooring waterproof?

The HDF core is water-resistant, but the floor is not waterproof. Wipe up spills immediately. Prolonged moisture exposure may cause swelling.

How many planks are in a pack?

Each pack contains 9 planks, covering approximately 2.1 m². Calculate your room area and add 5-10% waste.

What tools do I need for installation?

You'll need a jigsaw or laminate cutter, tapping block, pull bar, spacers, hammer, measuring tape, and a pencil. Safety glasses and knee pads are recommended.

USER MANUAL Glamour Kronotex

Preparation for installation

Prior to laying, please store Kronotex flooring horizontally in unopened packaging at room temperature for a minimum of 48 hours so that all planks have enough time to reach room temperature.

The following ambient conditions should prevail previous to, during, and three days following installation:

■ Floor surface: min. 15°C
Air temperature: min. 18°C
■ Humidity: 50 - 75%

Diagram of a room interior with heat transfer arrows indicating airflow or heat flow direction (no text or symbols)

Illustration of tools including a hammer, screwdriver, and rolled paper (no text or symbols)

Two-panel illustration showing a wooden plank being cut with a 'X' mark, and a separate view of the same wood grain (no text or symbols)

Laminate Installation Instructions and Considerations:

3D diagram showing a room with two desks and a wall-mounted device, with arrows indicating direction of movement (no text or symbols present)

3D architectural rendering of a hallway with windows and a floor plan, plus a small inset diagram showing a cabinet and electrical circuit (no text or symbols)

Laminate Care and Maintenance