RCR-103B - Car stereo Rolsen - Free user manual and instructions
Find the device manual for free RCR-103B Rolsen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo |
| Brand | Rolsen |
| Model | RCR-103B |
| DIN Size | 1-DIN (approx. 178 x 50 mm) |
| Weight | Approx. 0.5 kg |
| Power Supply | 12V DC (negative ground) |
| Radio Bands | AM/FM |
| Playback Media | CD, USB, AUX |
| Bluetooth | Yes (hands-free calling & audio streaming) |
| Max Power Output | 4 x 50W |
| Display | LCD with backlight |
| Remote Control | Included |
| Front Panel | Detachable (anti-theft) |
| Equalizer | Preset EQ modes (Rock, Pop, Classic, etc.) |
| Clock | Yes, 12/24h format |
| RDS | Yes (Radio Data System) |
| USB Port | Front USB (supports MP3/WMA) |
| AUX Input | 3.5mm front aux |
| Steering Wheel Control | Compatible (requires adapter) |
| Maintenance | Clean with soft, dry cloth; avoid liquids |
| Safety | Built-in fuse protection; disconnect battery before installation |
| Spare Parts & Repairability | Contact Rolsen support for replacement parts |
| Environmental | RoHS compliant |
Frequently Asked Questions - RCR-103B Rolsen
How do I install the Rolsen RCR-103B in my car?
Use the included mounting sleeve and trim ring. Connect the wiring harness according to the color code (yellow: constant 12V, red: switched 12V, black: ground). Secure the unit with the supplied screws. Ensure the detachable faceplate is removed during installation.
Why is there no sound from the speakers?
Check that the speaker wires are properly connected and not shorted. Ensure the volume is turned up and not muted. Verify the fader/balance settings are centered. Also check the car's fuse for the radio circuit.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone and search for devices. Select 'RCR-103B' from the list. If prompted, enter the PIN '0000' or '1234'. After successful pairing, you can make hands-free calls and stream audio.
Can I play music from a USB drive?
Yes, insert a USB drive with MP3 or WMA files into the front USB port. The stereo will automatically detect and play music. Use the SRC button to select USB mode. The drive must be formatted as FAT32.
How do I reset the unit?
Press the RESET button (usually a small pinhole) with a paper clip or similar object. This restores factory settings. If the unit malfunctions, a reset often solves minor issues.
What should I do if the faceplate is stolen?
The RCR-103B will not operate without its faceplate. Contact Rolsen customer service or an authorized dealer to order a replacement faceplate. Keep your proof of purchase handy.
How do I set the clock?
Press and hold the DISP button until the hour flashes. Turn the volume knob to adjust the hour, then press DISP again to switch to minutes. Adjust and press DISP to confirm.
The CD player is not reading discs. Why?
Ensure the disc is inserted label-side up. Check for scratches or dirt on the disc. Use a lens cleaning disc for the laser. If the problem persists, the lens may be damaged—contact support.
Can I connect an external amplifier?
Yes, the RCR-103B has RCA preamp outputs (front/rear). Connect your amplifier using RCA cables. Adjust the subwoofer and volume settings accordingly.
How do I clean the front panel?
Remove the faceplate and gently wipe it with a soft, dry microfiber cloth. Do not use any liquid cleaners or abrasive materials, as they may damage the surface or electronics.
User questions about RCR-103B Rolsen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car stereo in PDF format for free! Find your manual RCR-103B - Rolsen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RCR-103B by Rolsen.