SB572 - Pregnant SoundBot - Free user manual and instructions
Find the device manual for free SB572 SoundBot in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | SoundBot |
| Model | SB572 |
| Dimensions (H x W x D) | 7.5 x 3.5 x 3.5 inches |
| Weight | 1.2 lbs |
| Power Source | Built-in rechargeable lithium-ion battery, 1500 mAh |
| Charging Time | Approximately 2-3 hours |
| Playback Time | Up to 10 hours at moderate volume |
| Bluetooth Version | Bluetooth 4.2 |
| Wireless Range | Up to 33 feet (10 meters) |
| Speakerphone Function | Yes, with built-in microphone |
| Audio Input | 3.5mm AUX, Bluetooth, MicroSD card slot |
| Frequency Response | 100 Hz - 20 kHz |
| Output Power | 3W RMS |
| Water Resistance | IPX5 (splash proof) |
| Controls | Volume, Play/Pause, Track skip, Power, Pairing button |
| Included Accessories | Micro USB charging cable, 3.5mm audio cable, Carabiner clip |
| Cleaning Instructions | Wipe with a dry cloth; do not use abrasive cleaners. |
| Safety Precautions | Do not expose to extreme temperatures or moisture above IPX5 rating. |
| Spare Parts Availability | Replacement battery and charging port available from manufacturer. |
| Repairability | User-replaceable battery; other repairs recommended by professional. |
| Warranty | 1 year limited warranty |
| Color Options | Black, Blue, Red |
Frequently Asked Questions - SB572 SoundBot
How do I pair my SoundBot SB572 with my phone?
Turn on the speaker by pressing the power button. The LED will blink blue and red. On your phone, enable Bluetooth and select 'SB572' from the list. If prompted, enter '0000' as the PIN. You will hear a confirmation tone.
Can I use the speaker while it is charging?
Yes, you can use the SoundBot SB572 while it is connected to the charger. However, charging may take longer if the speaker is in use.
What is the battery life of the SB572?
At moderate volume levels, the battery lasts up to 10 hours. Actual battery life varies depending on volume and audio content.
How do I reset my SoundBot SB572?
To reset, press and hold the power button and the volume up button together for about 5 seconds until the speaker powers off. Then turn it back on. This clears any paired devices.
Is the SB572 water resistant?
Yes, the SoundBot SB572 has an IPX5 rating, meaning it is splash proof. It can withstand light rain and splashes, but should not be submerged.
Can I use a microSD card with this speaker?
Yes, the SB572 has a microSD card slot. Insert a formatted microSD card with MP3 files, and the speaker will automatically play the music in sequence.
How do I switch between Bluetooth and AUX mode?
If you connect an AUX cable, the speaker automatically switches to AUX mode. To switch back to Bluetooth, disconnect the AUX cable and press the Bluetooth button. The speaker will search for a paired device.
What should I do if the speaker does not charge?
Ensure the charging cable is securely connected. Try a different USB power source. If the issue persists, the battery may need to be replaced. Contact SoundBot support for a replacement battery.
Can I answer calls with the SB572?
Yes, the speaker has a built-in microphone. When a call comes in, press the play button to answer. Press again to hang up. The audio will route through the speaker.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents. Avoid getting moisture into the charging port or speaker grille.
User questions about SB572 SoundBot
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SB572 - SoundBot and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB572 by SoundBot.