G 4920 SC NZ - Dishwasher MIELE - Free user manual and instructions
Find the device manual for free G 4920 SC NZ MIELE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Dimensions (H x W x D) | 84.5 x 59.8 x 57.0 cm |
| Weight | 54 kg |
| Energy Efficiency Class | A++ |
| Power Consumption | 2.05 kWh per cycle (Eco) |
| Water Consumption | 9.5 L per cycle (Eco) |
| Noise Level | 46 dB(A) |
| Number of Place Settings | 14 |
| Number of Programs | 6 (Auto, Eco, Intensive, Normal, Quick, Rinse) |
| Drying System | AutoOpen Drying |
| Display | Digital with remaining time indicator |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Child Lock | Yes |
| Delay Start | Yes, up to 24 hours |
| Water Protection | AquaStop with leak protection |
| Third Basket | Cutlery tray |
| Interior Lighting | LED |
| Annual Energy Consumption | 240 kWh (based on 280 cycles) |
Frequently Asked Questions - G 4920 SC NZ MIELE
How do I install the Miele G 4920 SC NZ dishwasher?
Ensure you have a suitable water and electrical connection. Use the installation kit provided. Level the appliance using the adjustable feet. Connect the water inlet hose to a cold water supply with a 3/4 inch threaded connection. Connect the drain hose to a siphon or sink outlet. Plug into a properly earthed socket.
How do I add dishwasher salt?
Open the salt reservoir cap located at the bottom of the dishwasher (under the lower basket). Fill with dishwasher salt using a funnel. Replace cap and run a rinse program if salt overflows. The salt indicator will turn off when full.
How do I clean the filters?
Remove the lower basket and twist the multi-filter system counterclockwise to lift out. Rinse the fine filter and coarse filter under running water. Use a soft brush to remove debris. Reassemble and ensure the filter is properly locked.
What programs are available?
Programs include Auto (50-65°C), Eco (50°C, energy-saving), Intensive (70°C for heavily soiled items), Normal (65°C), Quick (45°C, short cycle), and Rinse (cold rinse).
How do I set the water hardness level?
Press the Start button until the display shows a number. Use the Plus/Minus buttons to adjust the hardness from 1 to 8. Refer to the manual for water hardness table. Confirm with Start.
How do I use rinse aid?
Open the rinse aid dispenser on the inside of the door. Fill to the MAX mark with rinse aid. Close the flap. Adjust the rinse aid dosage via the setting mode if needed (1-6).
Can I use all-in-one tablets?
Yes, select the Tablet option in the settings if available. For optimal results, add salt and rinse aid separately even when using tablets, especially in hard water areas.
What does error code F12 mean?
Error F12 indicates a water intake fault. Check if the water supply is turned on and the inlet hose is not kinked. Also ensure the AquaStop system is not activated. Reset by turning off the power for a few minutes.
How do I descale the dishwasher?
Use a Miele descaling agent or citric acid. Remove any dishes. Run the Auto program with the descaling agent placed in the detergent compartment. After the cycle, run a rinse program to remove residues.
How do I clean the spray arms?
Remove the upper and lower spray arms by unscrewing the retaining nut. Rinse under water and clear the jets with a toothpick. Reattach firmly. Ensure they rotate freely.
User questions about G 4920 SC NZ MIELE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual G 4920 SC NZ - MIELE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 4920 SC NZ by MIELE.