CC4000 OSE - CD Player MARANTZ - Free user manual and instructions
Find the device manual for free CC4000 OSE MARANTZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CD Player (5-Disc Changer) |
| Brand | Marantz |
| Model | CC4000 OSE |
| Disc Capacity | 5 discs (carousel) |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Dynamic Range | 98 dB |
| Total Harmonic Distortion | 0.002% |
| Output Level | 2.0 V RMS (analog) |
| Digital Outputs | Coaxial and Optical |
| Analog Outputs | RCA (unbalanced) |
| Remote Control | Included (RC-5 compatible) |
| Dimensions (W x H x D) | 440 x 114 x 360 mm |
| Weight | 8.5 kg |
| Power Consumption | 20 W (standby <5 W) |
| Power Supply | AC 230 V, 50/60 Hz |
| Finish | Black / Gold (OSE edition) |
| Special Features | OSE (Optimum Sound Edition) with selected components, HDAM output stage |
| Cleaning | Use a dry cloth; do not use solvents |
| Safety | Do not expose to moisture; ensure proper ventilation |
| Reparability | Spare parts available via authorized Marantz service centers |
Frequently Asked Questions - CC4000 OSE MARANTZ
How do I load multiple discs?
Press the OPEN/CLOSE button to open the drawer. Insert up to 5 discs into the carousel with the label side up. Press OPEN/CLOSE again to close. Use the DISC SKIP button to select a disc.
My player skips tracks, what should I do?
First, clean the disc. If the problem persists, try cleaning the laser lens with a CD lens cleaner. Ensure the player is on a stable surface. If skipping continues, consult a service technician.
The drawer doesn't open, how to fix?
Check if the unit is powered on. If not, check the power cord. If powered, try the manual eject hole (small pinhole near the drawer) with a paperclip. If the drawer still won't open, contact Marantz support.
Can I play CD-R/RW discs?
Yes, the CC4000 OSE can play CD-R and CD-RW discs, but it may not play all burned discs due to media quality. Use high-quality media and finalize the disc.
How to clean the lens?
Use a CD lens cleaner disc designed for audio players. Insert the cleaner disc and play it for a few minutes. Do not use liquids or cotton swabs.
No sound from digital output, what's wrong?
Ensure the digital output cable is firmly connected. Check that your receiver/amplifier is set to the correct digital input. Verify that the player's digital output is enabled in the settings (if applicable). Try a different cable.
Remote not working, possible causes?
Check the batteries in the remote. If using new batteries, ensure there are no obstructions between the remote and the player's sensor. Test the remote with a smartphone camera to see if it emits infrared light.
How to program track order?
Press PROGRAM on the remote. Use the numeric keypad to enter track numbers. For disc selection, press DISC SKIP before entering track. Press PLAY to start the programmed sequence.
What is the difference between CC4000 OSE and standard?
The OSE (Optimum Sound Edition) features selected higher-grade components, a HDAM output stage for improved sound quality, and often a gold-plated chassis. It is a special edition with enhanced audio performance.
How to switch between disc mode and single play?
Press the DISC MODE button to cycle through modes: All Discs, Single Disc, and Random. Refer to the manual for exact indications on the display.
User questions about CC4000 OSE MARANTZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your CD Player in PDF format for free! Find your manual CC4000 OSE - MARANTZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CC4000 OSE by MARANTZ.