YP250A - Scooter YAMAHA - Free user manual and instructions
Find the device manual for free YP250A YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Scooter |
| Brand | Yamaha |
| Model | YP250A (Majesty) |
| Engine Type | 4-stroke, single cylinder, OHC |
| Displacement | 249 cc |
| Cooling System | Liquid-cooled |
| Transmission | Automatic CVT |
| Starting System | Electric starter |
| Dimensions (L x W x H) | Approx. 2230 x 780 x 1320 mm |
| Seat Height | Approx. 760 mm |
| Wheelbase | Approx. 1560 mm |
| Fuel Capacity | 13 liters |
| Curb Weight | Approx. 180 kg |
| Max Power | Approx. 21 hp (15.5 kW) @ 7500 rpm |
| Max Torque | Approx. 22 Nm @ 6000 rpm |
| Battery Type | 12V, MF (maintenance-free), 12 Ah |
| Front Brake | Hydraulic disc, Ø 267 mm |
| Rear Brake | Hydraulic disc, Ø 267 mm |
| Front Tire | 120/80-12 |
| Rear Tire | 130/70-12 |
| Suspension (Front) | Telescopic fork |
| Suspension (Rear) | Unit swing arm |
| Maintenance Interval | Every 6000 km or 6 months |
| Storage | Under-seat compartment (approx. 35L) |
Frequently Asked Questions - YP250A YAMAHA
What type of engine oil should I use for the Yamaha YP250A?
Use a high-quality 4-stroke engine oil with viscosity SAE 10W-40 or 10W-50, meeting API SG or higher. Check oil level regularly via the dipstick.
How do I check the tire pressure on my YP250A?
Tire pressure should be checked when tires are cold. Recommended pressure: front 2.0 bar (29 psi), rear 2.3 bar (33 psi) for solo riding. Adjust for load.
Where is the VIN located on the Yamaha YP250A?
The Vehicle Identification Number (VIN) is stamped on the right side of the steering head and also on the frame near the battery compartment.
What is the correct spark plug for the YP250A?
Use a NGK CR8E or equivalent spark plug. Gap should be 0.8-0.9 mm. Replace every 12,000 km or as per maintenance schedule.
How often should I change the drive belt?
The CVT drive belt should be inspected every 12,000 km and replaced every 24,000 km to prevent breakdowns. Use genuine Yamaha parts.
What coolant type is recommended for the YP250A?
Use ethylene-glycol based coolant mixed with distilled water at a 50:50 ratio. Check level in the reservoir when cold.
How do I replace the battery on my YP250A?
Access the battery under the floorboard. Remove the negative terminal first, then positive. Install a 12V 12Ah MF battery and reconnect positive first.
What is the recommended fuel octane rating?
Use unleaded gasoline with a research octane number (RON) of 91 or higher. Avoid ethanol blends above 10%.
How do I adjust the headlight beam?
Locate the adjustment screws behind the headlight cover. Turn clockwise to raise, counterclockwise to lower. Aim the beam at a wall 10 meters away.
What is the maximum load capacity of the YP250A?
The maximum load (rider + passenger + luggage) is 180 kg. Do not exceed the GVWR listed on the VIN plate.
User questions about YP250A YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scooter in PDF format for free! Find your manual YP250A - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YP250A by YAMAHA.