VDP1300 - Intercom Clover Technologies Group - Free user manual and instructions
Find the device manual for free VDP1300 Clover Technologies Group in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Door Phone Intercom |
| Brand | Clover Technologies Group |
| Model | VDP1300 |
| Display | 7-inch TFT LCD color monitor |
| Camera | 1/4" CMOS, 480 TV lines, IR night vision |
| Audio | Two-way full duplex audio with echo cancellation |
| Power Supply | DC 12V / 1A (adapter included) |
| Monitor Dimensions | 230 x 155 x 25 mm |
| Outdoor Unit Dimensions | 130 x 90 x 40 mm |
| Weight | Monitor: 0.8 kg; Outdoor unit: 0.3 kg |
| Mounting Type | Wall-mounted (monitor) / Surface-mounted (outdoor) |
| Connection | Wired (4-wire) connection between units |
| Maximum Distance | Up to 100 meters |
| Key Features | Call, monitor, unlock door, intercom, volume control, brightness adjustment |
| Memory | Supports up to 2 outdoor units (optional) |
| Ringer | Melody selection with adjustable volume |
| Electric Lock Release | Yes, via button on monitor |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Low voltage operation; follow installation instructions |
| Spare Parts Availability | Contact Clover Technologies Group or authorized dealers |
| Repair | Refer to qualified service personnel; no user-serviceable parts |
Frequently Asked Questions - VDP1300 Clover Technologies Group
How do I install the VDP1300 intercom?
Install the outdoor unit near your entrance at about 1.5m height. Mount the indoor monitor on a wall. Connect them using a 4-wire cable (up to 100m). Connect power adapter to the monitor. Follow the wiring diagram in the manual.
The monitor screen is blank. What should I do?
Check that the power adapter is plugged in and the monitor is receiving power. Ensure the cable connection between units is secure. If still blank, try resetting the monitor by unplugging power for 10 seconds.
Can I add multiple outdoor units?
Yes, the VDP1300 supports up to 2 outdoor units. You can connect them in parallel to the same indoor monitor. Each unit will ring when pressed.
How do I adjust the volume of the ringer?
On the monitor, press the Menu button, navigate to 'Ring Volume' settings, and adjust using the +/- buttons. There are typically 4 levels plus mute.
Does the camera have night vision?
Yes, the outdoor unit is equipped with IR LEDs for night vision. It can capture clear images up to 5 meters in complete darkness.
How do I unlock the door using the monitor?
When someone calls, press the 'Unlock' button on the monitor to activate the electric lock release. Ensure your door lock is compatible (typically 12V DC lock).
The audio is muffled or echoey. What can I do?
Check that the volume is not too high. Reduce the monitor speaker volume. Ensure the outdoor microphone is not obstructed. If echo persists, adjust the echo cancellation settings via the menu.
What type of cable should I use?
Use a 4-core shielded cable, minimum 0.5mm² per core. Twisted pair recommended for long runs. Do not run the cable parallel to mains power lines to avoid interference.
How to clean the monitor and camera?
Use a soft, dry microfiber cloth to gently wipe the screen and camera lens. Do not use any chemical cleaners or liquids. Avoid scratching the surface.
Is the VDP1300 compatible with other doorbells?
The VDP1300 is designed to work with its own outdoor unit. It is not compatible with standard doorbells. The included camera and call button are required for full functionality.
User questions about VDP1300 Clover Technologies Group
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual VDP1300 - Clover Technologies Group and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VDP1300 by Clover Technologies Group.