Glacier TG-02 - Refrigerator Savio - Free user manual and instructions

Product Type	Thermal Grease (Thermal Interface Material)
Brand	Savio
Model	Glacier TG-02
Thermal Conductivity	8.5 W/m·K
Working Temperature Range	-50°C to 250°C
Thermal Impedance	<0.135 °C·in²/W
Density	2.6 ± 0.08 g/ml
Electrical Conductivity	0 pS/m (non-conductive)
Package Contents	Thermal grease, spatula, user manual
Application	Spread thin layer on processor IHS or apply 3×3 mm drop
Cleaning Surface	Dry cloth or isopropyl alcohol
Storage	May discharge trace silicone oil; remix before use
Safety	Keep out of reach of children; do not consume; eye contact rinse with water; inhalation move to fresh air
Repairability	Not applicable (single-use consumable)
Disposal	Dispose according to local regulations for chemical waste

Frequently Asked Questions - Glacier TG-02 Savio

How do I apply Savio Glacier TG-02 thermal grease?

Clean the processor IHS and radiator base with a dry cloth or isopropyl alcohol. Spread a thin layer of grease with the included spatula, or apply a 3×3 mm drop in the center of the IHS. Assemble the cooling system, screwing in opposite corners for even spreading.

What is the thermal conductivity of TG-02?

The thermal conductivity of Savio Glacier TG-02 is 8.5 W/m·K.

Is the thermal grease electrically conductive?

No, Savio Glacier TG-02 has an electrical conductivity of 0 pS/m, making it non-conductive and safe for use on sensitive electronics.

What is the working temperature range?

The working temperature range is -50°C to 250°C, suitable for standard CPU and GPU applications.

Can I reuse the grease after removing the cooler?

It is not recommended to reuse thermal grease. Once removed, clean both surfaces with isopropyl alcohol and apply a fresh layer for optimal performance.

What should I do if I get the grease in my eyes?

In case of eye contact, wash your eyes with a substantial amount of water and seek medical attention if irritation persists.

How should I store the thermal grease?

Store in a cool, dry place. The grease may discharge trace amounts of silicone oil during storage; this is normal. Remix before use.

What is the thermal impedance of TG-02?

The thermal impedance is <0.135 °C·in²/W, indicating low resistance to heat flow.

Does the package include a spatula?

Yes, the package includes a spatula for spreading the grease evenly.

Is the grease safe for children?

No, keep out of reach of children. Do not ingest. If ingested, rinse mouth with plenty of water and consult a doctor.

USER MANUAL Glacier TG-02 Savio

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, on social media or on the website of the store where you made the purchase. If you want to show off our device on SAVIO FanPage on Facebook, we will be very pleased.

If there is something that we could improve on our products, please write to us at [e-mail]

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

1. Technical specification\*:

	TG-01 TG-02 TG-03 TG-04
Thermal conductivity:	4.7 W/m·K	8.5 W/m·K 13.5	W/m·K 14.5	W/m·K
Working temperature:	-50 - 250°C	-50 - 250°C	-50 - 250°C	-50 - 280°C
Thermal impedance:	<0.155 °C · in 2 /W	<0.135 °C · in 2 /W	<0.102 °C · in 2 /W	<0.095 °C · in 2 /W
Density:	2.5 ± 0.08 g/ml	2.6 ± 0.08 g/ml	2.9 ± 0.08 g/ml	2.8 ± 0.08 g/ml
Electrical conductivity:	0 pS/m 0	pS/m 0 pS/m	0 pS/m

*Depending on the model purchased.

2. Package content:

• SAVIO GLACIER thermal grease
- User manual
- Spatula for spreading the grease

3. Applying thermal grease:

3.1 Clean the processor IHS surface and the radiator base with a dry cloth or Isopropyl Alcohol.
3.2 Spread a thin layer of thermal grease over the processor IHS with a spatula added to the set. Alternatively, you can apply a 3 × 3 mm drop of the grease in the middle

of the IHS.

3.3 Assemble the cooling system of the processor. The best method is to screw in the opposite corners of the frame. It allows even spreading of the grease.

3.4 After mounting the cooling system, check if there are no leakages. If leakages appear, it means that there is too much grease applied. You have to clean the excess with a dry cloth or Isopropyl Alcohol.

4. Additional information:

While storing, the grease can discharge trace amounts of silicone oil. That is normal and does not have any detrimental effect on grease efficiency. The paste should be re-mixed during the application.

5. Safety conditions:

- Keep out of reach of children.

- It is forbidden to consume the product.

- In case of contact with the eye, you need to wash your eyes with a substantial amount of water.

- In case of inhaling fumes from the grease, it is necessary to go outside to breathe fresh air for a while.

• In case of ingestion it is not necessary to induce vomiting. Rinse your mouth with plenty of water.
• If you notice any side effects, not mentioned above, please contact medical support.

Information for customers and contractors and communication regarding complaints:

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: [e-mail], and by phone at [phone]. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to

obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator's legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

LET'S PLAY 2GETHER!

POLSKI

Instrukcja obsługi