XC-901 PRO - Computer Case KeepOut - Free user manual and instructions
Find the device manual for free XC-901 PRO KeepOut in PDF.
| Product Type | Computer Case |
| Brand | KeepOut |
| Model | XC-901 PRO |
| Form Factor | Mid Tower |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Side Panel | Tempered Glass (left) |
| Drive Bays | 1 x 3.5" HDD (internal) |
| Expansion Slots | 7 (standard ATX) |
| Fan Support (Top) | 2 x 120mm or 2 x 140mm |
| Fan Support (PSU Shroud) | 2 x 120mm |
| Water Cooling Support (Top) | 240mm / 280mm radiator |
| Water Cooling Support (Front) | 240mm / 280mm / 360mm radiator |
| Water Cooling Support (Rear) | 120mm radiator |
| Front I/O | USB 3.0, USB-C, Audio, LED Control Button |
| Power Supply Type | Standard ATX (bottom mounted) |
| RGB Control | Reset/LED button; compatible with motherboard RGB software (e.g., ASUS AURA SYNC) |
| Materials | Steel, Tempered Glass |
| Color | Black |
| Dimensions (L x W x H) | Approx. 450 x 210 x 480 mm |
| Weight | Approx. 7 kg |
| Safety Notes | Handle tempered glass with care; keep dry; use at room temperature; tighten screws crosswise. |
| Cleaning Instructions | Use a soft dry cloth; avoid abrasive liquids. |
| Disposal | Comply with local WEEE regulations; recycle packaging separately. |
| Warranty | Standard manufacturer warranty (check with seller) |
Frequently Asked Questions - XC-901 PRO KeepOut
User questions about XC-901 PRO KeepOut
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Computer Case in PDF format for free! Find your manual XC-901 PRO - KeepOut and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XC-901 PRO by KeepOut.
USER MANUAL XC-901 PRO KeepOut
Open the tempered glass by pulling the side handle.
Align the motherboard with the holes in the chassis and tighten the screws.
Note: Each motherboard has different installation characteristics, it is recommended that you consult its instruction manual when installing it.
2
Remove the security screw from the expansion slot cover, remove the necessary expansion slot covers, insert the graphics card and secure it with a screw.
4
You can additionally install two 120mm / 140mm fans on top and two 120mmm fans on the PSU. Esta caja soporta refrigeración líquida superior (240mm, 280mm), frontal (240mm, 280mm, 360mm), trasera (120mm)
This PC case supports water cooling, top (240mm, 280mm), front (240mm, 280mm, 360mm), rear (120mm)
7
Note: If the reset cable is connected to the Motherboard, you can reset the PC with the Reset / Led button. Then RGB light can be controlled by Software, for example, ASUS motherboard can use AURA SYNC software. If the Reset cable is connected to Fan Hub (2 pin) you can reset the PC by long pressing the Power Button or Reset windows on PC. And switched the RGB light by Reset / Led button.
8
Conecte el cable USB 3.0 interno (color azul) al conector USB 3.0 de la placa base.
Connect the internal USB 3.0 cable (blue color) to the USB 3.0 connector on the motherboard.
Conecte el cable USB-C interno al conector USB Type-E de la placa base.
Connect the internal USB-C cable to the USB Type-E connector on the motherboard.
Safety and maintenance instructions:
Read the user manual before your first use.
Attention: Follow the steps in the user guide to assemble the PC case.
Be very careful with the tempered glass panel, do not hit and drop it, risk of cutting.
When tightening the screws do it crosswise.
Do not spill liquid of any kind on the unit.
Always keep the product at room temperature.
The product is intended for indoor use.
Clean the product with a soft dry cloth. Do not use abrasive liquids!
Follow local ordinances to dispose of the product.
Reciclado:
AEE RII-RAEE 5548. In this manual, the container (WEEE) symbol indicates that the product is subject to the European directive 2012/19/UE, electrical and electronic products, batteries, and batteries and other accessories must necessarily be subject to a selective collection.
At the end of the life of the device, make use of the recycling bins. This gesture will help reduce the health risks and preserve the environment.
Municipalities and distributors, will provide essential details on recycling your old device. If this device carries an internal battery, it must be removed and deposited separately for proper management.
Please recycle; the packaging of this product is recyclable. The product box is made of cardboard and must be recycled in the blue container and the internal blister is made of plastic and must be recycled in the yellow container. Recycle today for a better tomorrow.
Soporte Técnico:
For more information about installing and configuring this product, please visit our www.keepoutgaming.com or send an e-mail to the following address: support@keep-out.eu
USER GUIDE
Gaming pc case
keepoutgaming.com
MADE FOR E-SPORT
XC-901 PRO
Keep Out is a registered brand of Approx Iberia. S.L. C/Tecnología 5, 41120 Gelves, Sevilla (Spain). Keep Out is not associated to any manufacturer. All brands and registered trademarks are the property of their respective owners and are used for descriptive purposes only. Made in China.
Leer las instrucciones antes de usar. Read the instructions before using.
Brand : KeepOut
Model : XC-901 PRO
Category : Computer Case