C2-DH46-UA2-CBL-KVM - Switch StarTech.com - Free user manual and instructions

Product Type	KVM Switch
Brand	StarTech.com
Model	C2-DH46-UA2-CBL-KVM
Number of Computers Supported	2
Video Interface	DisplayPort (x2) + HDMI (x2)
USB Interface	USB 2.0 (x2 for peripherals)
Max Video Resolution	3840x2160 @ 30Hz
Audio Support	Yes (3.5mm audio jacks)
Control Method	Push buttons, hotkeys, or on-screen display (OSD)
Power Source	USB bus-powered (no external adapter required)
Dimensions (L x W x H)	12.5 cm x 8.5 cm x 2.5 cm
Weight	0.5 kg
Construction Material	Metal housing
Integrated Cables	Yes (2x DisplayPort, 2x USB, 2x audio, all included)
Compatible Operating Systems	Windows, macOS, Linux, Chrome OS
LED Indicators	Port selection LEDs
Hotkey Switching	Scroll Lock + Scroll Lock + 1/2
Repairability	No user-serviceable parts; professional repair recommended
Warranty	2 years

Frequently Asked Questions - C2-DH46-UA2-CBL-KVM StarTech.com

How many computers can I connect to this KVM switch?

The C2-DH46-UA2-CBL-KVM supports up to 2 computers simultaneously.

Does this KVM switch support 4K resolution?

Yes, it supports resolutions up to 3840x2160 @ 30Hz via DisplayPort and HDMI.

Do I need an external power adapter?

No, the switch is USB bus-powered. Simply connect the USB cable to your computer for power.

Can I use the KVM switch with a mix of DisplayPort and HDMI monitors?

Yes, the switch has both DisplayPort and HDMI ports, but you must use the same video interface for both computers.

How do I switch between computers?

You can switch by pressing the front panel button, using hotkeys (Scroll Lock + Scroll Lock + 1 or 2), or via the on-screen display (OSD).

Does the KVM switch share USB peripherals?

Yes, it has 2 USB 2.0 ports for sharing keyboards, mice, or other USB devices between computers.

Is audio supported?

Yes, the switch includes 3.5mm audio jacks for microphone and speaker sharing.

Are the cables included?

Yes, the switch has integrated cables for video, USB, and audio, so no additional cables are needed.

Can I use the switch with Linux or macOS?

Yes, the switch is compatible with Windows, macOS, Linux, and Chrome OS.

What should I do if the switch is not detected?

Ensure all cables are securely connected, try a different USB port, and verify that your computer supports USB HID devices. If issues persist, contact StarTech.com support.

USER MANUAL C2-DH46-UA2-CBL-KVM StarTech.com

2-Port Dual Monitor Cable KVM Switch - HDMI - 4K 60Hz

Component Function
1	LED Indicators	Solid Green = Selected PC is ConnectedBlinking Green = Selected PC is not detectedAmber LED = Selected Audio Source
2	PC 1 Audio Connectors	Green: Connect to 3.5mm Headphone PortPink: Connect to a 3.5mm Microphone Port
3	PC 1 USB-A Host Connector	Connect to a USB-A port on PC 1
4	PC 1 HDMI Connectors • Connect to an HDMI Enabled Computer
5	Remote Port Selector	A wired button used to switch between PC 1 and PC 2Press and Release the Remote Switch to switch between PC 1 and PC 2
6	PC 2 HDMI Connectors • Connect to an HDMI Enabled Computer
7	PC 2 USB-A Host Connector	Connect to a USB-A port on PC 2
8	PC 2 Audio Connectors	Green: Connect to a 3.5mm Headphone PortPink: Connect to a 3.5mm Microphone Port
9	Console Microphone Port	Pink: Connect a Microphone
10	Console Audio Output	Green: Connect an Audio Device (ie. Speakers or Headphones)
11	Console HDMI Output Ports	Connect to two HDMI Displays
12	Console USB HID Ports	Connect a USB Mouse and Keyboard

Product Information

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/C2-DH46-UA2-CBL-KVM

Package Contents

• KVM Switch x 1
- Quick-Start Guide x 1

Requirements

• HDMI Enabled Computers x 2
- HDMI Cables x 2
- HDMI Display x 2
• USB HID Devices (Keyboard / Mouse) x 2
• (Optional) Microphone x 1
• (Optional) Powered/Active Stereo Speakers or Headphones x1
• (Optional) Headset x 1

Note: A Headset may require the use of a Headset Adapter. Please check with the manufacturer of the Headset for more details.

Installation

Connect the Computers

Note: Power off all Computers, Displays, and Peripherals before completing the following installation steps.

1. Connect the built-in PC 1 HDMI Connectors to the HDMI Output Ports on PC 1.
2. Connect the built-in PC 1 USB Host Connector to a USB-A Port on PC 1.
3. (Optional) Connect the built-in PC 1 Audio Connectors to the corresponding 3.5 mm Audio Ports on PC 1.
4. Repeat Steps 1-3 to install PC 2.

Connect the Console

1. Connect a USB Mouse and Keyboard to the Console USB HID Ports, located on the front of the KVM Switch.
2. Connect an HDMI Cable from each HDMI Display, to each of the Console HDMI Output Ports, located on the front of the KVM Switch.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient or relocate the receiving antenna.

+ Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user's authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

1. (Optional) Connect a 3.5 mm Audio Cable from the Stereo Speakers or Headphones to the Speaker Audio Port (green), located on the side of the KVM Switch.
2. (Optional) Connect a 3.5 mm Audio Cable from the Microphone to the Microphone Audio Port (pink), located on the side of the KVM Switch.

Operation

Switching with the Remote Port Selector

To switch between which Host Computer is active, press and release the button on the Remote Port Selector.

Software Operation

Install the KVM Switching Software on each computer connected to the KVM Switch to use features such as autoscan, fixed audio, and more.

Note: To download the latest KVM Switching Software, please visit: www.StarTech.com/C2-DH46-UA2-CBL-KVM

Hotkey Reference Guide

Note: Each hotkey sequence keystroke should be pressed within two seconds.

Keyboard with Scroll Lock: To switch Computers the hotkey combination is Scroll Lock + Scroll Lock + 1 - 2

Keyboard with no Scroll Lock: Use the available software to define the new hotkey sequence

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

- If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

Gowerton Rd, Brookmills

Brackmillis Northam

NN4 7BW

StarTech.com Ltd.

Siriusdreef 17-27

2132 Wt Hoofddorp The Netherlands

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es All:startech.com/ol

NL: startech.com/it IT: startech.com/it

JP: startech.com/jp