DN03SE - Tumble drier SMEG - Free user manual and instructions

Type	Freestanding Tumble Dryer
Installation Type	Freestanding
Capacity	7 kg
Drying Type	Condenser (Self-condensing)
Energy Class	A+
Annual Energy Consumption	560 kWh
Number of Drying Programs	15
Display Type	LED
Drying Temperature Options	Low / Medium / High
Delay Start	Up to 24 hours
Audible Alarm	Yes
Child Lock	Yes
Lint Filter	Mesh filter, clean after each cycle
Condenser Cleaning Indicator	Yes
Water Tank	3.4 L (plumbable drainage optional)
Reverse Tumble	Yes
Anti-crease Function	Yes (30 min)
Noise Level	65 dB(A)
Dimensions (H x W x D)	850 x 595 x 580 mm
Weight	45 kg
Power Supply	220-240 V / 50 Hz
Power Consumption (Off-mode)	0.5 W
Number of Programs	15 including Cotton, Synthetics, Delicates, Wool, Shirts, Jeans, Sport, Bed&Linen, Towels, Quick 30min, Eco, Air Fluff, Gentle, Extra Dry, Cupboard Dry
Warranty	2 years (parts and labor)
Brand	Smeg
Model	DN03SE

Frequently Asked Questions - DN03SE SMEG

How do I clean the lint filter on my Smeg DN03SE tumble dryer?

Open the door and pull the lint filter out from the bottom of the door opening. Remove the lint by hand or with a soft brush. Rinse under running water if necessary, dry, and reinsert. Clean after every cycle to maintain efficiency.

Why is my Smeg DN03SE not drying clothes completely?

Check if the lint filter is clogged, the condenser unit is clean, and the water tank is empty. Also ensure you have selected the correct program for the fabric type. Overloading can reduce drying performance.

Can I install the Smeg DN03SE tumble dryer under a counter?

Yes, it is designed for freestanding installation but can be placed under a counter with proper ventilation. Remove the top panel if required, and ensure air circulation as per the manual.

How do I drain the water from the Smeg DN03SE?

The dryer has a water tank that collects condensation. You can empty it manually after each cycle. Alternatively, you can connect a hose to the drain outlet to allow continuous drainage into a sink or drain pipe.

What does the 'Condenser Clean' indicator mean?

This indicator lights up after a number of cycles to remind you to clean the condenser unit. Locate the condenser behind the lower panel, remove it, rinse with water, and dry before reinserting. This ensures optimal energy efficiency.

How do I use the delay start function on my Smeg DN03SE?

Press the 'Delay Start' button repeatedly to set the desired delay in hours (up to 24). Then press 'Start'. The dryer will begin drying after the set time. Useful to run cycles during off-peak hours.

Why is my Smeg DN03SE making unusual noises?

Noises can be caused by foreign objects in the drum (coins, buttons) or an unbalanced load. Check the drum and redistribute the laundry. If noise persists, check if the dryer is level and feet are adjusted.

Can I dry wool items in the Smeg DN03SE?

Yes, select the 'Wool' program which uses gentle tumbling and low heat to prevent shrinkage. Always check the care label and do not overload. Use a mesh bag for small items.

How do I reset the Smeg DN03SE tumble dryer?

If the dryer is stuck or shows an error, unplug it from the mains for 1 minute, then plug back in. Alternatively, press and hold the 'Start' button for 5 seconds to reset the cycle.

What is the maximum drying capacity for synthetic fabrics?

For synthetics, the maximum load is 3.5 kg (half of the rated cotton capacity). Overloading may cause uneven drying and wrinkles.

USER MANUAL DN03SE SMEG

Blue flag with a circle of twelve yellow stars (European Union flag motif)

ENERG

енергия · Еверγεια

DN03SE

A+++

A++

A+

A

B

C

D

A+++

ENERGIA · ЕНЕРГИЯ · ЕНЕРГЕІА ENERGIJA · ENERGY · ENERGIE ENERGI

211

kWh/annum

220

min/cycle*

10

kg

63

db

A B C D E F G

* цикъл · cyklus · portion · zyklus прóʊραμμα · ciclo · tsükkel ohjelma · ciklus · ciklas · cikls čiklu · cyclus · cykl · ciclu program · torkomgång