DP-802 - NAS D-LINK - Free user manual and instructions
Find the device manual for free DP-802 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | D-Link |
| Model | DP-802 |
| Form Factor | Desktop |
| Number of Bays | 2 |
| Supported Drives | 2.5" or 3.5" SATA HDD/SSD |
| Processor | Marvel ARMADA 370 1.2 GHz |
| Memory | 512 MB DDR3 |
| Network Interface | 1 x Gigabit Ethernet |
| USB Ports | 2 x USB 2.0 |
| Dimensions (W x D x H) | 146 x 102 x 86 mm |
| Weight | 0.8 kg (without drives) |
| Power Supply | External, 12V DC, 2.5A |
| Power Consumption | 15 W (typical) |
| RAID Support | JBOD, RAID 0, RAID 1 |
| File System | EXT4, Btrfs |
| Cooling | 1 x 40mm fan |
| Operating Temperature | 0°C to 40°C |
| Storage Humidity | 5% to 95% non-condensing |
| Supported Protocols | SMB/CIFS, NFS, AFP, FTP, WebDAV |
| Management | Web-based interface |
| Warranty | 2 years limited |
Frequently Asked Questions - DP-802 D-LINK
How do I access the D-Link DP-802 from my computer?
You can access the NAS via the web interface by typing its IP address in a browser. For file access, map a network drive using SMB/CIFS protocol.
What RAID modes does the DP-802 support?
The DP-802 supports JBOD, RAID 0 (striping), and RAID 1 (mirroring). RAID 1 is recommended for data redundancy.
Can I upgrade the memory on the DP-802?
The device has 512 MB DDR3 soldered; memory is not upgradeable. However, you can expand storage via USB ports.
How to reset the DP-802 to factory defaults?
Press and hold the reset button on the back for 10 seconds until the LED blinks. Release and wait for reboot.
What is the maximum storage capacity supported?
Each bay supports up to 4TB drives, for a maximum of 8TB raw storage. Actual usable capacity depends on RAID configuration.
Does the DP-802 support external USB drives?
Yes, it has two USB 2.0 ports for connecting external storage or printers.
How can I access my files remotely?
Enable FTP or WebDAV in the settings and forward ports on your router. Alternatively, use D-Link's cloud service if supported.
What kind of hard drives are compatible?
Compatible with 2.5-inch or 3.5-inch SATA hard drives or SSDs. It is recommended to use NAS-rated drives for 24/7 operation.
How to clean the DP-802?
Power off the device and unplug. Use a soft dry cloth to wipe the exterior. Do not use liquids or solvents. Clean the ventilation grille with compressed air.
What happens if a drive fails in RAID 1?
The system continues to operate. Replace the failed drive with a new one of equal or larger capacity, then rebuild the array via the management interface.
User questions about DP-802 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual DP-802 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DP-802 by D-LINK.