AX-SVT - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AX-SVT AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | AXESS |
| Model | AX-SVT |
| Product Type | Wireless Bluetooth Audio Receiver |
| Dimensions (L x W x H) | 2.5 x 1.5 x 0.6 inches (63.5 x 38.1 x 15.24 mm) |
| Weight | 1.8 oz (51 g) |
| Power Source | Built-in Lithium-ion battery |
| Battery Capacity | 200 mAh |
| Charging Input | Micro USB, 5V/1A |
| Charging Time | Approximately 2 hours |
| Playback Time | Up to 8 hours |
| Bluetooth Version | 5.0 |
| Bluetooth Range | 33 ft (10 m) |
| Audio Codec | SBC, AAC |
| Input | 3.5mm AUX (for connection to source) |
| Output | 3.5mm AUX (to speakers or car stereo) |
| Microphone | Built-in for hands-free calling |
| Controls | Multi-function button: Play/Pause, Track skip, Volume, Call answer/end |
| LED Indicator | Yes (for power and pairing status) |
| Compatibility | Smartphones, tablets, laptops, car stereos with AUX input |
| What's in the Box | AX-SVT receiver, Micro USB charging cable, 3.5mm AUX cable, user manual |
Frequently Asked Questions - AX-SVT AXESS
How do I pair my AX-SVT with a Bluetooth device?
Turn on the AX-SVT by pressing the multi-function button for 2 seconds. The LED will flash red and blue. Enable Bluetooth on your device and select 'AX-SVT' from the list. If prompted, enter PIN 0000. Once connected, the LED will turn solid blue.
How do I charge the AX-SVT?
Connect the included Micro USB cable to the charging port on the AX-SVT and the other end to a USB power source (e.g., computer, wall charger). The LED will turn red while charging and turn off when fully charged. Charging time is about 2 hours.
Can I use the AX-SVT while it is charging?
Yes, you can use the AX-SVT while it is charging. However, it is recommended to charge it fully before first use for optimal battery performance.
How do I reset the AX-SVT?
If the device is unresponsive, press and hold the multi-function button for 10 seconds until the LED turns off. Then release and turn it on again. This will reset the device and clear any previous pairing.
What is the battery life of the AX-SVT?
The built-in lithium-ion battery provides up to 8 hours of playback time on a full charge. Actual battery life may vary depending on volume level and usage.
How do I connect the AX-SVT to my car stereo?
Plug the included 3.5mm AUX cable into the output port of the AX-SVT and the other end into the AUX input of your car stereo. Pair your phone with the AX-SVT via Bluetooth, then play audio. You can also use the built-in microphone for hands-free calls.
Does the AX-SVT support aptX or other high-quality codecs?
The AX-SVT supports SBC and AAC codecs. It does not support aptX or LDAC. However, AAC provides good quality for Apple devices and SBC is universal.
Can I connect the AX-SVT to multiple devices simultaneously?
No, the AX-SVT can only connect to one Bluetooth device at a time. To switch devices, disconnect the current one and pair the new device.
The LED on the AX-SVT is not turning on. What should I do?
Ensure the device is charged. Connect to a charger and wait a few minutes. If the LED still does not turn on, try resetting the device by holding the multi-function button for 10 seconds. If the issue persists, the battery may be defective.
How do I clean and maintain the AX-SVT?
Disconnect all cables and turn off the device. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or harsh chemicals. Keep the device away from extreme temperatures and moisture.
User questions about AX-SVT AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AX-SVT - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX-SVT by AXESS.