CSL 6560B - Loudspeaker Glemm - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Glemm
Model	CSL 6560B
Dimensions	20 x 8 x 8 cm (7.9 x 3.1 x 3.1 in)
Weight	0.8 kg (1.76 lbs)
Power Source	Built-in rechargeable battery (3.7V, 1800mAh) via Micro USB
Charging Time	2-3 hours
Playback Time	Up to 6 hours at 50% volume
Bluetooth Version	5.0
Bluetooth Range	Up to 10 meters (33 ft)
Supported Audio Formats	MP3, WMA, WAV, FLAC
Additional Functions	FM radio, AUX input, microSD card slot, USB playback
Controls	Power, Volume, Play/Pause, Mode, Next/Previous, Microphone
Output Power	2 x 5W (total 10W)
Frequency Response	80Hz - 20kHz
Signal-to-Noise Ratio	≥80dB
Material	ABS plastic with metal grille
Safety	Do not expose to water or extreme temperatures. Keep away from children.
Maintenance	Wipe with a soft, dry cloth. Do not use harsh chemicals.
Spare Parts / Repairability	Not user-serviceable. Contact Glemm support for repairs.
Included Accessories	Micro USB cable, AUX cable, user manual

Frequently Asked Questions - CSL 6560B Glemm

How do I pair the speaker with my phone via Bluetooth?

Turn on the speaker and press the Mode button until you hear a pairing tone. On your phone, enable Bluetooth and select 'Glemm CSL 6560B' from the list. If prompted, enter PIN 0000.

What should I do if the speaker does not turn on?

First, charge the speaker for at least 30 minutes using the included Micro USB cable. If still no power, try a different cable or adapter. If the issue persists, contact Glemm support.

Can I use the speaker while it is charging?

Yes, the speaker supports pass-through charging, meaning you can play music while charging. However, battery life may be affected if used at high volume during charging.

How do I reset the speaker?

To reset, turn off the speaker and press and hold the Power button for 10 seconds until you hear a beep. Release and turn on again. This clears all paired devices.

Why is the sound distorted?

Distortion may occur if the volume is too high. Lower the volume on both the speaker and your device. Also check if the audio source is clipping. Ensure the speaker is not placed in a confined space.

How do I clean the speaker?

Use a soft, dry cloth to wipe the exterior. Do not use water or cleaning agents. For the grille, gently brush with a soft-bristled brush to remove dust. Avoid pushing debris inside.

Can I connect the speaker to a TV?

Yes, if your TV has Bluetooth or an AUX output. For Bluetooth, pair as with a phone. For wired connection, use the included AUX cable to connect the TV's headphone jack to the speaker's AUX input.

What is the battery life and how do I extend it?

The battery lasts up to 6 hours at moderate volume. To extend life, reduce volume, turn off the speaker when not in use, and avoid extreme temperatures. Charge fully before first use.

How do I switch between modes (Bluetooth, FM, AUX, etc.)?

Press the Mode button repeatedly to cycle through modes. The current mode will be indicated by an LED or voice prompt. In FM mode, press and hold the Play button to auto-scan stations.

Is the speaker waterproof?

No, the speaker is not waterproof. It is designed for indoor use only. Avoid exposure to rain, splashes, or high humidity to prevent damage.

USER MANUAL CSL 6560B Glemm

Audio speaker operating 100V and intended for PA SYSTEM. The high quality of the components used for its construction guarantees an excellent acoustic performance.

The installation of this product must be carried out exclusively by specialized technicians, skilled in electric and audio systems.

In case of wrong installation or connections, the manufacturer doesn't take any responsibility for damages to people or objects.

Refer to the below picture for correct cable connection. Before starting the installation, make sure that the amplifier is off. During operation there is a tension of 100V on the connection terminals, which could be dangerous.

Keep the instruction manual for future reference. Use the included bracket for correct wall or ceiling placement.

Connection

This speaker operates with constant tension and is therefore suitable for connection to 100V systems. Make sure to connect the speaker's black terminal to the "COM" socket of the amplifier, while the speaker's red terminal is to be connected to the 100V socket of the amplifier.

If you need to connect more than one speaker, after checking the total power, you can connect them to the amplifier with a "parallel" connection (fig.1).

Remember to consider the correct section of the cables, according to the distance of the speakers from the amplifier.

Consider carefully the power of the speakers and of the amplifier to which they are connected: the total power of the speakers must not exceed the amplifier's power.

Compliance, warranty and service

The CE brand indicates that the product complies with the essential requirements of the applicable European directives and related standards. The product is covered by warranty according to current national and European regulations.

For complete warranty conditions and for technical service requests visit the website: www.glemm.eu

We also suggest to register your product, by logging into the website's private area. In this way you will have the possibility to receive updates and information on our items.

The manufacturer, in order to improve its products, reserves the right to modify the characteristics whether technical or aesthetic, at any time and without notice.

PRODOTTO DA / PRODUCED BY:

KARMA ITALIANA Srl

Via Gozzano 38/bis

21052 Busto Arsizio (VA)

www.karmaitaliana.it

www.glemm.eu

154 - Made in P.R.C.