AX-DSP-MAZ1 - Processor AXESS - Free user manual and instructions
Find the device manual for free AX-DSP-MAZ1 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Signal Processor (DSP) for car audio |
| Brand | AXESS |
| Model | AX-DSP-MAZ1 |
| Input Channels | 8 high-level / low-level inputs |
| Output Channels | 8 preamp outputs (RCA) |
| Sampling Rate | 48 kHz / 96 kHz selectable |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.01% |
| Input Voltage Range | 10-16 V DC |
| Power Consumption | 0.5 A (idle), 2 A (max) |
| Dimensions (W x D x H) | 7.1 x 4.3 x 1.6 inches (180 x 110 x 40 mm) |
| Weight | 0.9 lbs (0.4 kg) |
| Mounting Type | Under-dash or trunk mount |
| Connectivity | USB (for PC tuning), Bluetooth (optional) |
| Software Compatibility | Windows / macOS tuning software (free download) |
| Equalizer | 31-band graphic EQ + parametric EQ per channel |
| Crossover | Adjustable high-pass, low-pass, band-pass filters (6-24 dB/oct) |
| Time Alignment | Independent delay for each channel (up to 20 ms) |
| Remote Control | Optional wired remote (sold separately) |
| Safety Certifications | CE, RoHS compliant |
| Maintenance | Keep dry; clean with soft cloth; avoid solvents |
| Repairability | No user-serviceable parts; contact authorized service center |
| Included Accessories | USB cable, mounting screws, quick start guide |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - AX-DSP-MAZ1 AXESS
How do I install the AX-DSP-MAZ1?
Connect the input wires to your car stereo's speaker outputs (high-level) or preamp outputs (low-level). Then wire the output RCAs to your amplifiers. Use the included USB cable to connect to a PC for tuning via the free software. Secure the unit under a dash or in the trunk with the provided screws.
What software is needed for tuning?
Download the AXESS DSP Tuning software (Windows/macOS) from the official website. Install it on your computer and connect the DSP via USB to adjust equalizer, crossover, time alignment, and more.
How many channels does the DSP process?
It has 8 input channels and 8 output channels. You can mix inputs and assign them to any output, with independent processing per channel.
Can I use this DSP with a factory radio?
Yes, the high-level inputs accept speaker-level signals from factory radios. Use the included wiring harness or splice directly. Ensure no clipping occurs.
Does it require external power?
Yes, connect the power wire (12V) to a constant or switched 12V source and ground to chassis. It draws up to 2A, so use a 5A fuse.
How do I reset the DSP to factory defaults?
Press and hold the reset button on the unit (small hole) for 5 seconds using a paperclip. Alternatively, use the software 'Reset to Default' function.
Is Bluetooth available?
The AX-DSP-MAZ1 does not have built-in Bluetooth. However, you can add an external Bluetooth receiver (sold separately) to stream audio directly to the DSP.
What is the maximum input voltage?
The high-level inputs can handle up to 28V peak (50V peak-to-peak). For low-level inputs, stay within 4V RMS to avoid distortion.
How do I update the firmware?
Check the AXESS website for firmware updates. Download the update file and use the tuning software's 'Firmware Update' function while connected via USB. Do not power off during update.
Can I control volume from the driver seat?
The unit does not come with a remote knob, but you can purchase an optional AX-RC1 wired remote controller. Connect it to the remote port on the DSP.
User questions about AX-DSP-MAZ1 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual AX-DSP-MAZ1 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX-DSP-MAZ1 by AXESS.