LK58 - Kitchen sink Elkay - Free user manual and instructions

Brand	Elkay
Model	LK58
Product Type	Kitchen Sink
Material	Stainless Steel
Finish	Satin
Number of Basins	Single
Installation Type	Drop-in / Self-Rimming
Overall Dimensions (L x W)	Approximately 33 x 22 inches
Bowl Depth	Approximately 9 inches
Drain Opening Size	3.5 inches
Mounting Hardware Included	Yes (strainer and mounting clips)
Sound Dampening Pads	Included
Compliance	ASME A112.19.3
Weight	Approximately 15 lbs
Warranty	Limited Lifetime
Maintenance	Clean with mild soap and water; avoid abrasive cleaners
Installation Instructions Provided	Yes

Frequently Asked Questions - LK58 Elkay

What tools are needed for installation?

You will need plumber's putty, a screwdriver, and a wrench. The putty is applied to the underside of the strainer body or the top of the sink drain flange area.

How do I attach the drain assembly?

Apply a good quality plumber's putty to the underside of the strainer body or the top of the sink drain flange area. Assemble and tighten all components securely in sequence as illustrated in the manual. Check for leaks.

What type of sealant should I use?

Use a good quality plumber's putty or a silicone-based sealant. Avoid using excessive amounts that might squeeze out and look messy.

How do I clean my Elkay LK58 sink?

Clean with mild soap and warm water using a soft cloth. Rinse thoroughly. Do not use abrasive cleaners, steel wool, or harsh chemicals that can scratch or dull the stainless steel finish.

Can I use a garbage disposal with this sink?

Yes, the LK58 is compatible with standard 3.5-inch garbage disposals. Ensure the disposal unit is properly supported and the drain connection is secure.

What is the warranty for this sink?

Elkay offers a limited lifetime warranty for the LK58 against manufacturing defects. Contact Elkay customer service for details.

How do I remove stains from stainless steel?

For stubborn stains, use a stainless steel cleaner or a paste of baking soda and water. Rub gently with the grain using a soft cloth, then rinse and dry.

Is the sink pre-drilled for a faucet?

The LK58 typically comes with a single pre-drilled hole for a faucet. If you need additional holes, you may need to drill them carefully or use a deck plate.

What should I do if the drain leaks?

First, check if all components are tightened securely. If still leaking, disassemble, clean old putty, and reapply fresh plumber's putty. Ensure the putty forms a continuous seal.

Can I install the sink as an undermount?

No, the LK58 is designed for drop-in (self-rimming) installation only. For undermount, consider Elkay's undermount models.

USER MANUAL LK58 Elkay

Installation Instructions

Drains

LK2	LK8	LK18 /
LK	LK35 / K335	LK99 / L
LKJ3!

INSTRUCTIONS:
1) APPLY GOOD QUALITY PLUMBER'S PUTTY OR SEALANT TO UNDERSIDE OF STRAINER BODY OR TOP OF SINK DRAIN FLANGE AREA.
2) ASSEMBLE AND TIGHTEN SECURELY ALL COMPONENTS IN SEQUENCE AS ILLUSTRATED.
3) CHECK FOR LEAKS.