LKSS1141A - Faucet Elkay - Free user manual and instructions
Find the device manual for free LKSS1141A Elkay in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Elkay |
| Model | LKSS1141A |
| Product Type | Faucet |
| Mounting Type | Deck mount |
| Number of Handles | 2 |
| Handle Style | Cross handles |
| Spout Type | Standard spout |
| Spout Height | 5.5 inches |
| Spout Reach | 4 inches |
| Centerset | 4 inches |
| Valve Type | Ceramic disc cartridges |
| Material | Solid brass construction |
| Finish | Chrome |
| Flow Rate | 2.2 GPM at 60 psi |
| Inlet Connections | 1/2-inch NPT male |
| Maximum Water Pressure | 60 psi |
| Recommended Pressure | 20-60 psi |
| Certifications | cUPC, NSF 61, ANSI A112.18.1 |
| Lead-Free | Compliant with lead-free requirements |
| Warranty | Limited lifetime warranty |
| Maintenance | Wipe clean with soft cloth; use mild soap and water |
| Included Accessories | Installation hardware, hot/cold water lines |
Frequently Asked Questions - LKSS1141A Elkay
How do I install the Elkay LKSS1141A faucet?
Installation requires mounting the faucet on a deck with 4-inch centers. Use a basin wrench to tighten the mounting nuts. Connect the 1/2-inch NPT supply lines and seal with thread tape. Open the water supply and check for leaks. Refer to the installation manual for detailed steps.
What is the recommended water pressure for this faucet?
The LKSS1141A operates optimally at 20-60 psi. Exceeding 60 psi may cause damage to the ceramic disc cartridges. Install a pressure regulator if needed.
How should I clean and maintain the faucet finish?
Use a soft cloth dampened with mild soap and water. Avoid abrasive cleaners or scouring pads, as they will scratch the chrome finish. Rinse thoroughly and dry to prevent water spots.
Is the faucet lead-free?
Yes, the LKSS1141A is manufactured with lead-free brass and meets NSF 61 standards, ensuring safe drinking water.
Can I replace the cartridges myself?
Yes, the ceramic disc cartridges are serviceable. Shut off the water supply, remove the handle screw and handle, then unscrew the cartridge retainer. Pull out the old cartridge and replace with the correct Elkay replacement cartridge.
Does the faucet have a warranty?
The LKSS1141A comes with a limited lifetime warranty covering defects in material and workmanship. Warranty does not cover normal wear or misuse.
How do I remove the aerator for cleaning?
Unscrew the aerator from the spout tip using pliers or a key. Soak it in vinegar to remove mineral deposits. Rinse and reinstall. Regular cleaning helps maintain flow rate.
What is the flow rate of the faucet?
The flow rate is 2.2 gallons per minute (GPM) at 60 psi. This complies with federal water efficiency standards.
Are replacement parts available?
Yes, Elkay offers spare parts such as handles, cartridges, aerators, and mounting hardware. Check the parts list in the manual or contact customer service.
How do I fix a leaky faucet?
Leaks are usually caused by worn O-rings or debris in the cartridge. First, check the supply connections and tighten if needed. If dripping from spout, replace the ceramic cartridge. If leaking around handles, replace the handle O-rings.
User questions about LKSS1141A Elkay
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual LKSS1141A - Elkay and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LKSS1141A by Elkay.
USER MANUAL LKSS1141A Elkay
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elkay
Model : LKSS1141A
Category : Faucet